I once blogged that every time I touch the Range Rover something goes wrong. Well yesterday was no exception. Mr. Fisher and I were sorting out our two camping kits. We were trying to determine how much gear we were going to be hauling to S.C.A.R.R. We determined that we had a fairly large amount of kit. Mostly lots of pieces that don’t necessarily fit efficiently in the back of the Range Rover. Let’s be honest, it takes a lot of gear to make two 50-year-old guys comfortable for two days of camping.
I decided it was necessary to remove the 70% seat out of the back. I know Bill Burke removes his 30% seat to house his ARB refrigerator. So with that idea in mind I went to remove the seat. Basically it is four 10mm bolts and the seat comes out. I flipped the seat up and started to work on the bolts. It took some figuring to sort out they were 10mm. I took 10mm sockets to use but my 12 point socket in 3/8ths didn’t turn the nut. I wondered what size the nut was if 10mm didn’t work. Turned out my 12 point socket was stripped. That’s disappointing but not a show stopper. I had a 10mm in 1/2 that was 12 point and narrow walled. That narrow wall was very necessary because the nuts are very close to the seat bracket.
I got the socket set and made one turn and bingo, the bolt breaks. […]