Video Blog: Panhard Rod Bushings (Post #573) 6/24/2017

Professional driver, do not try this at home.

I discuss panhard rod bushing failure and deathwobble.

I demonstrate how knackered my panhard rod bushings were.

Removing the failed bushing requires you to use a “punch”, I used a socket which is slightly small in diameter than the bushing, to press the failed bushing out. It is similar to the process of pressing them in except when you press in new ones you used a socket that is larger in diameter than the bushing.

I demonstrate how to press in new bushings. Find the beveled side of the panhard rod and the bushings will go in easier than the side that is not beveled. I used a vise to get the bushing started. This helps with getting the bushing “square” in the hole before you apply the press to the bushing.

Getting the tool lined up correctly is 90% of the battle.

Victory is mine. The bushing is pressed in. You do this for both sides.

I had trouble with the width of the bushing sleeve and it require a bit of grinding to get it mounted. I used a bench mounted grinder. Just take off a little of the material and try to fit. If you need more, grind off a little more then refit. I went to the bench grinder four times to get both sides right before mounting with the bolts.

Thanks for watching and Happy Rovering.