steering leak - OKIEROVER.COM

July 6, 2007May 15, 2023

July 8th, 2005 (Post #61)

July 8th, 2005

There is a huge update in the works. I have started on it now twice, once yesterday, and again today, having deleted several days work. Very frustrating.

Engine
JagGuy and I have the engine in. We started on it April and finished it after three long weekends. JagGuy has all the skill necessary for a successful transplant. And it showed. He had the heads off and the engine built before I could get in the shop each weekend. He has the luxury of Fridays being fun days and he used his “fun” day for my engine. What a great friend.

With the engine swap we found several other problems. I will start listing them and I will probably forget some as there were many.

Radiator
It was indeed a head gasket problem but with that there was also a problem with the radiator. It was clogged again. We noticed that when we revved the engine the hoses would flex. Meaning there was a lot of pressure in the system. Frustrated I replaced the radiator with a new one from Atlantic British. Cooling problems vanished.

Heater Core
One of the final things to be blown by the old engine was the heater core. I have heard horror stories about getting the dash off to replace this part. I will wait for a weekend in September or October when it gets cooler to replace this. I bought the replacement core when it came up on British Pacific’s Steve’s Deal of the Day.

The wife
While I’m sure some of you were expecting me to say I was replacing my wife, I have not. She has been harrassing me lately about the costs of the BWB. Keeping a 12 year old car on the road in good working order is hard. It is harder when it was designed in a British Pub by 12 drunk engineers. But for my piece of mind and to reassure her that I was not spending the milk money for frivolous toys I pulled a report out of Quicken of all the auto repair expenses. I was surprised by the amount, surprised in a good way. She was surprised in a bad way. 2800 dollars (US) was the tally for the period since I made the final payment back in November 2004.

Not bad for all the things I’ve bought for the engine and including oil changes for both cars. She still believes with all her heart that a $450 a month car payment would be cheaper than putting parts on the paid off Rover. I have now classified the Rover as a restoration project. So the costs are easier to stomach as I am restoring a car, just like on TV!!!!

Steering seal
The morning after I got the BWB home with all the overheating problems we planned to return her to the shop in Edmond, it was a cool April morning so I figured the heating problems would be less if I went in the morning. After I pulled into the gas station to fill up I got out and noticed the long red stream of fluid leading from the street to underneath the Rover. Transmission fluid, but from where?

After a long look it was the steering box. Since ATF will burn and considering the blow back to the exhaust I drove her home defeated and disappointed. We put a seal on the next weekend.

Steering Shaft
Once again on sale at British Pacific. If you look at the steering shaft you will notice a rubber grommet there. Mine is hard as a rock and cracked. Obviously failed. Now the question begs why can’t we just replace the rubber bits. Well I bought a new shaft and will investigate if the old can be repaired when I get it off of there. Hammerin’ Dan observes that the heat from the headers is probably to blame in the rubber failing. Possibly some asbestos wrap might be in order.

Brake Switch
The ABS lights came on and with some investigation and a clever way to short the diagnostic plug I learned my brake light switch had failed. I got a replacement on sale from British Pacific’s Deal of the day. The installation was not any fun due to the location and the contortionist position you have to get in. Also my eyes don’t work that well up close and so most of the install was done while guessing on a blurry image.

Radio
The steam that escaped from the blown heater core filled the cab with nasty antifreeze steam. The radio immediately from that day forward would act like it lost power often loosing the code. Occassionaly it would not work at all. I thought sure the steam killed it. I was wrong. The ignition switch is failing. You may say, “what the hell?” Well it would be a good question.

The accessory function of the switch that powers many things like the windows and other stuff is apparently shorting out or not making connection. So among the other things the ignition switch is failing and needs some help.

Carpets
Had to clean the carpets again due to the antifreeze leak inside the cab. Due to my previous planning I did not have to remove the center console. Sweet!

Exhaust
Having spent a good three hours under the BWB during the engine project I noticed that none of the hangers were replaced the last time I had the exhaust worked on at University Muffler. That is disappointing cause I like those guys their work is just not very good. I had it in there again recently to have a torn exhaust pipe fixed. Due to the hangers being unhooked the only place the exhaust was attached had stressed the pipe to the point that the silencer at the rear was about to break off. I had them cut it off and weld on a pipe. It changed the sound some but not too bad. Well the weld for that section broke. So I took it to Discount Muffler just up the road from the office and had them put a good weld on it. It cost me 25 bucks but it’s now welded. I will come back to them to have the new cats welded in as soon as I buy them.

November 24th, 2003 (Post #35)

November 24, 2003
Updates
I could have told you cold weather was coming. As you will see the list of repairs for the Big White Bus has only grown right here before Christmas and the weather was beautiful the last two weeks. But alas no money in the pocket of this hapless Rover owner for repairs.

Well lots of things have been going on lets get them listed. I have reported the Error 34 and it’s cause, I am sure, is the oxygen sensors. So I consulted the site Rangerovers.net and am going to buy the sensors fairly soon. I am going to try the NGK equivilent parts at the reduced cost. I’ll let you know how that goes.

I also have to have new tie-rod ends. Those are obviously getting critical due some noticable
variations in my steering. This is a less exciting repair but again very important. As I don’t wish
to pay for two alignments I will probably order a bushing set also. With the addition of installing my new springs and shocks this will make for a very interesting Saturday I am sure.

I have a catalytic converter with a nasty rattle also. I will probably wait to do this as I am not sure I can afford to put that much out all at once. This is not so critical and I can stand the noise for a bit more.

A new leak in the power steering hoses near the steering box is going to be yet another adventure. I have learned a lot from the last time and will be more careful this time. I hope they will be able to be recrimped and if not I will have a new set made. This is a tiring annoyance and I don’t want to do this project again.

This morning I noticed a bit of anti-freeze on the drive way on the driver’s side of the truck. I was running late and not dressed for auto maintenance this morning so that will also wait ’til later. I can’t think of any good reason for the leak over there so I am a bit concerned.

As you can see dear friends the Big White Bus is showing it’s age. We intended to take her on a trip this fall to Denver but with all these things I decided not to risk the long drive. Sad as she would have been a more comfortable alternative to our Taurus. I have been contemplating a big rebuild but I don’t have a third car so that will also have to wait. My laziness and my financial situation have crept up on me and it shows due to the list above.

July 6, 2007May 15, 2023

January 13th, 2003 (Post #18)

January 13, 2003
RovErica asked me while I was doing my duty of delivering her “taxi style” to another of her activities, “so, do you have any work to on the Rover?”

What a question. I knew I only had 5 minutes to tell her an answer before she got out
of the truck so I gave her a short list. To which she asked, “was any of that under the hood?”
Yes and told her which of the things would be under the hood. On the way home that got me thinking, that there is a lot to do on the Rover and I’m not doing any of it. You probably have a list of want-to-dos, have-to-dos, and should-dos, too. I encourage you to write it down and then let it eat a whole in you as you continue to ignore the work you have just made for yourself.
What follows is a list of the things I know about and should start work on when the days and funds allow.

In no particular order.

Cooling Problem.

The cooling problem only raises it’s ugly head during the summer months in Oklahoma. I have done some work on this the last two years but have not found the problem yet.

Power Steering Leak, Part Duex

I had a hose fail in the past. Now I have another leak but it has been too cold to find it.

Broken fog lamp

The Big White Bus was driven by my daughter and the next day I had a broken lamp. Coincidence?

Trouble Light

Want to add a trouble light I got off a 1995 GMC truck under my hood.

Driver’s Seat

Heater never worked. A warm butt is a happy butt. Memory switches quit working. No biggy but annoying.

Air Conditioning Compressor

Has a leak. Actually the entire seal around the compressor is showing the tell tale green
ooze we put in to find the leak. Probably a new compressor sometime next year.

Suspension

I know I should replace the shocks and the bushings. Ryan has suggested new springs too.

Exhaust.

The exhaust is in bad shape. I forgot to include this on the list with the rest last week.

Mysterious leak

There is a mysterious leak that wets the carpet up front during the rainy months. Windshield is probably the culprit. I need to have it pulled and resealed.

So if you were wondering if you were the only one with a naggy list of Rover To-Dos, wonder no more you are among friends.

July 6, 2007May 15, 2023

October 21st, 2002 (Post #8)

October 21, 2002

After the rain and dreariness of Saturday gave way to sun and pleasant temperatures I declared Sunday as “Auto Maintenance Day” (echo reverb). I cleaned up the wife’s minivan and put some air in her low tire and an oil change. I also took the opportunity to change the Rover’s oil and check the fluids.

Oil change went off without any problems. The Rover was a pint low on transmission fluid. Bought a really cool fluid funnel and hose for that. But while I was under I noticed the tell-tale signs of another failing fitting on the power steering hoses. I have more of the red juice leaking under the steering box and several hoses are wet and dripping. The last time I saw this it was a split hose. When the Rover was just sitting there no major leak but when you turned the wheel, Niagara Falls. I buggered the fittings up pretty bad getting the offending hose off and had to get a new/used one from Rover Cannibal. My original plan was to remove the hose and have the fittings recrimped. JagGuy and someone else told me that was the way to go. But as it was really messed up getting another was the only option. After I butchered the fittings I attempted to have one made. This was a nightmare. In most cases this is the cheap and convienient way to get a new hose. You can also get the groovy braided lines which I am way keen on. Well the Britishness of the fittings left me with no option but to put an original Rover part back on. Braided hose disappointment.

I didn’t look too much further as my time and funds this month are limited (new carpet and tile). But probably tonight I will have RovErica turn the wheel as I watch the life blood of the power steering system leak out on to the driveway.

Clean up tip of the week (echo reverb)

I used some laundry detergent to clean up my oil spills after the oil change. Just spread some out and let it set for a little bit. Then with a broom brush it around. Sweep up the majority and wash the rest “harmlessly” down the gutter.

Sorry for the echo reverb it’s a new special effect and I am gonna use it until I wear it out.