Okierover – Page 2 – OKIEROVER.COM

July 15, 2025August 10, 2025

Installing Shocks on my Range Rover Classic Overland Rig (Post #710) 7/14/2025

In this episode I install some shocks on the old Range Rover Classic. I went for the basic shocks this time. Ordering these from Atlantic British resulted in Boge brand shocks for the front and Girling for the back. The item should have been four from Boge, but I guess they didn’t have the stock and swap the parts for what they did have.

I went about installing them and guess what I found??? RUST. I know, you are shocked, but it’s true. The cups that hold the rubber bushings were very rusty. I cleaned them up the best I could and painted them with Rust Inhibitor paint.

I have no fantasy in my mind that this will stop the rust, but it did FEEL good to try. Also the nuts were VERY corroded and were quite a chore to remove. In order for me to not go through that again, I added some anti-seize goo to the thread parts of the shock. It won’t affect the nuts staying in place because they are nylocs.

The install went about as I expected. I did one front and one back for the video. I’ll do the other half next week and start looking at all the parts that have to come off to replace the bushings.

Thanks for reading, like and subscribe if you watch the attached video, and Happy Rovering.

July 7, 2025

Unboxing with a Bad Back Parts for my Range Rover Classic Overland Rig (Post #709) 7/7/2025

I am still recovering from my back injury. I am able to unbox my bushings and shocks. Boring I know, but you do what you can when you are not quite 100% (or even 60%). Next video will be an install video for shocks for my Range Rover Classic Overland Rig.

I bought the basic shocks and a set of bushings. The rubber type. No matter what I read about poly bushings, I have experienced them failing. They are good for about 5 years. For half the price you can buy rubber bushing that last twice as long. I fell for the hype one time. Not again. If I could get OEM rubber bushings I would install them every time over poly.

The shocks I ordered were also the basic shocks. I could have popped for another set of Terrafirmas or Old Man Emu but I am on a budget. The Big White Bus had Old Man Emus on it when I first swapped the shocks. At that time I put Terrafirma on her. They served me well and I have no complaints.

So this time I went budget and if I notice them failing in the future and my need for better shocks comes up again, I’ll investigate a “name brand”. Girling is a recognized provider for British autos and motorcycles. I make a joke in the video about “girly” shocks, I’m sure these will be fine for the type of driving I do. The front set is Boge which is a German brand. I’ve never heard of them. I’m sure they will be fine too.

The next step will be removing all the suspension parts that are going to get new bushings and taking them up to my friend’s shop to press the old out and the new in. How exciting! I wonder if Mike will quote another “Love Buffet” song for us? Love Buffet’s lead singer passed away in 2024.

Thanks for reading, like and subscribe, and Happy Rovering.

https://youtu.be/gHp8XaVtDaI

June 29, 2025

Planning the Suspension Repairs for my Range Rover Classic Overland Rig (Post #708) 6/29/2025

Camp Mimi 10 is in full swing. Part of Camp Mimi this year is Mrs. Okierover taking the grands to a “cabin” in Medicine Park, Oklahoma. Its a house, but if she wants to call it a cabin, whatever.

With that she needed to take the Honda Pilot to the dealer for a check of the air conditioning. We had a lively debate as to whether or not it was actually cooling when we went to get a Fro-Yo from Braums last weekend. My assertion was it was NOT cooling. She insisted it was and I said, “whatever you think dear…”. So she didn’t get it looked at and drove it to Kansas to pick up Lucas and Logan.

When she got back she said it was NOT cooling. So off to the dealer for investigation. No leaks just 6 year old coolant. So they swapped it out. Yay cooling!

They also told us that our brake pads wore dangerously worn. She told them I would take care of it. I stopped by O’Reilly’s on the way home picked up a set of pads $92.00(US) or there abouts.

I swapped them first thing Saturday. They were NOT dangerous if anything they were about half way. The pads wear pretty unevenly. The inside pads wear less than the outside pads. I need to get over to the Piloteer Message Board and see what that is all about. While I was swapping them, I managed to do one stupid thing and put my back out.

It doesn’t take much, and I’ve been REALLY careful for nearly a year, so it was pretty unexpected that I cut my weekend short by screwing that up.

I’ve started my steroids and am popping Ibuprofen like an over-zealous Corpsman was handing Chicklets to me. I see the doc on Tuesday, and I bet she’ll give me a steroid shot if I ask for one. I’ll be right as rain by the time the campers return.

With all that going on, I took Lucas for a ride. He enjoyed it. The ride just reinforced to me that I need to swap all the bushings and get the shocks replaced. I ordered them Saturday night and expect them this week. They will go in either late on Sunday or early Monday so look for another video then.

That’s about it, like and subscribe to the channel, and Happy Rovering.

https://youtu.be/jEocqJyciC0

June 22, 2025June 22, 2025

Planning the Exterior Lights for my Range Rover Classic Overland Rig (Post #707) 6/22/2025

I have a plan to light the exterior of the Range Rover Classic. I want to be able to turn on the exterior lights while I lay on my mattress inside. This is mostly to have a tactical advantage if something or someone is on the outside of my vehicle.

I want to be able to turn on a single light or with one switch turn on ALL THE LIGHTS. In order to do this I needed to come up with a circuit drawing for this task. I tried my hand but had little to no confidence that I had done it correctly.

So I consulted my best friend Mike to get a circuit drawn and to get a source for the parts. I drove up last weekend and had lunch with he and Paul and then went back to Mike’s shop. We sat and had a beer in his RV while we talked about lots of stuff and got caught up since we saw each other at my birthday part in October last year.

He scribbled a circuit for me. We talked about where to get the parts and he gave me the details. He buys parts that are for automotive use. He buys from them to build the trailer wiring conversions from military to civilian / civilian to military. He sells them on XM381.com if that is something you are looking for.

I took the graphic and re-drew it. Then from the parts I ordered after we met I cobbled together a loose circuit and tested it. Using the battery from the Range Rover Classic and some wires and two lights from my stock of lights I’ve salvaged from breaker’s yards.

I love it when a plan comes together.

Next thing I need to do is order some switches and 16 gauge wire and decide on the lights I want to install. I have some picked out, I’ll need to make a decision one way or another.

I took my time and puzzled this out and I’m so happy I got it to work. My drawing was “close” but would not have worked. Mike was so gracious to help me with this.

Thanks for reading, like and subscribe, and Happy Rovering.

June 9, 2025

Planning the Interior of my Range Rover Classic Overland Rig (Post #706) 6/9/2025

In this video I talk about some of our crazy Oklahoma weather and what I’m planning for the back of the Range Rover Classic Overlander.

In short, mostly because I think you’ll enjoy the video, I’m planning a few things. First among them is how I’ll be wiring up some lights I have planned. Next is the bed box with the cliche drawer to hold my cook stove and some cooking gear and maybe even some clothes or whatever.

A second battery is definitely going to happen too. I’ve been making a list of all the items that would be supported by a second battery. I think you’d be surprised at all the things you might want to have on your overland rig that takes up precious battery juice.

Here’s the list so far:

Interior lights
Exterior security lights
Phone
Cell phone booster
Tablet
Camera batteries
Drone batteries
Refrigerator
Cooking light
Diesel or Propane heater
Hot water heater
Water pump

Are you surprised? I was! The more I think about it the more items I come up with that would be supported by the second battery.

Electric blanket

See! Watch a couple hundred hours of YouTube (like me) and I bet you’d come up with a few more.

Tire inflator

See! There I go again!

Tune in to the channel and follow along. You never know, I might come up with another one!

Like and Subscribe.

Thanks for reading and Happy Rovering.

June 1, 2025May 25, 2025

Let’s go for a ride in my Range Rover Classic Overland Rig (Post #705) 6/1/2025

I took the Range Rover around the block (technically the section lines) to get all the fluids warmed up and to gauge road readiness. The fluids did get hot. The RRC is NOT ready for the road.

What I experienced was a vehicle that has some obvious issues.

First, the shocks. I think they are tired and probably done. They’ve been on this truck for at least 15 years.

Second, my medium springs on an empty truck make the ride pretty harsh. I’ve pulled all the seats out and all the interior. Besides the noise, it has very little on board to make the springs do anything.

Third, there are some bushings that have failed. You’ve seen the poly bushes in the back failing. I also experienced the signs of a panhard bush failing when the truck dives right when I let off the gas. Probably wouldn’t hurt to get them all refreshed.

I have this crazy idea to take the truck over to Mickey’s Garage and have him get her up on the lift to do an inspection. If I could get a list of all the stuff that needed replacement, I’d feel better about what I needed to do next.

In the video, I talk about my coolant being low. It took about a half gallon to top her off. Considering how long she’s sat and air bubbles getting flushed out from the engine being at full revs I’m not worried about the level changing like that.

I also had a brake light on. I had replaced the plug on the brake fluid reservoir. I got the wires swapped into the new plug and I guess one had a poor connection. I fussed with it and the light went out. I’ll probably crimp the spade connectors again to tighten them up.

I also showed off my new Knightsbridge seat covers with Molle. I’ve got a couple of bags on there and am scouring Pinterest on the potentials.

That’s about it for this week.

Thanks for reading and Happy Rovering.

https://youtu.be/WDFVjEBxj08