Among the Gourds and Gravel (Post #574) 7/3/2017

In all my 50+ plus years of living in Oklahoma I have never been to the top of Mount Scott. So this past weekend, I took off to see it. Mount Scott is located in the Wichita Mountain Wildlife Refuge near Lawton, Oklahoma. It rises to 2,464 feet above sea level and towers over the surrounding area. There is a three-mile long road that takes you to the top.

Continue reading “Among the Gourds and Gravel (Post #574) 7/3/2017”

Capulin Volcano and the Northwest Passage 2016, Part Three (Post #571) 1/23/2017

Day Three

We woke in Picture Canyon. Erik and his team planned to return to Oklahoma City. We made a big breakfast cooking everything we hadn’t eaten so far on the trip. By the time we finished cooking eating and packing up Mr. Fisher and I had to change our plans too.

The trek up Black Mesa and back takes at least 5 hours. We had 7 hours of driving to get home. We had an hour and a half to get to the trail-head. The math put us in Norman around 11 PM or even later. That wasn’t really an option as I had to go back to work on Tuesday. So we skipped Black Mesa. I’ve been to the Black Mesa area three times and I haven’t made the hike yet. My next trip to the region Black Mesa will be my primary goal. I’m doing that first.

We headed to Campo, Colorado to get some fuel. We found a garage there with a mechanic, that’s something to put in the memory bank just in case. We fueled up and struck up a conversation with a local gentleman who heard we were overlanding and gave us a great suggestion for a route home. We headed south out of Campo looking for Road C. We headed east and soon found ourselves out on the wide open grassland.

Along the way we found a historical marker and stopped to check it out. Turned out it was a short cut for the Santa Fe Trail.

Santa Fe Trail Aubry Cutoff

You can find it by clicking this map.google.com link.

GPS coordinates

“Santa Fe Trail Marker with Stone Posts”
37°01’05.7″N 102°27’42.3″W
37.018258, -102.461744

The markers were for the Aubry Cutoff. From the sign, it was a way from the Mountain Route to the Cimarron Route on the Santa Fe Trail.
The sign was well weathered and really hard to read so I translated it for you.

“Francois Xaver Aubry was born December 3, 1824 near Quebec. In 1843 at 18, he left his home and moved to St. Louis, Missouri where he began working as a clerk for a French Canadian merchant company.”
“In 1846 lured by the talk of trade making money and adventure on the Santa Fe Trail, he gave up his job as a clerk and became a full-time trader. By 1850, Aubry had traveled multiple routes with the goal of finding the shortest sand-free path that provided adequate water and wood. In 1851 he found it establishing what became known as the Aubry Cutoff.”
“From 1846 to 1854 Aubry was among the business most influential merchants on the Santa Fe Trail. His caravans were usually large and his speed and reliability in getting goods to the right market ahead of others was legendary. The average length of Aubry’s trips was 37 days while other merchants would take up to 90 days to deliver their goods to Santa Fe.”
“Along with this mercantile reputation he developed a talent for individual travel. Aubry’s 730 mile trip on horseback from Santa Fe to Independence Missouri in the **** days…”

The rest of the sign is indistinguishable.

The grassland was amazing. I’ve never been so far away from everything. It is a truly wide open place.

A panoramic view.
Such a great road.

There were other markers laying out the Santa Fe Trail.


We crossed in to Oklahoma.

Mr. Fisher stands in Colorado and Oklahoma at the same time.

We decided to head to the Washita Battlefield National Historic Site. I’ve never been but have wanted to go several times. The shortcut through Texas was really terrible. We battled the 18-wheelers hauling pre-hamburgers and pre-steaks at mach 2 on the roads throughout the panhandle of Texas. I’m pretty sure most of them should be arrested and thrown into jail for the speed they were traveling and the absolute utter disregard for other drivers. Seriously we were nearly rammed by two 18-wheelers going well over 80 mph. There’s no way they could have stopped if something happened.

We stopped in one these cattle towns and made some sandwiches and ate lunch. Every town had a silo like this one.

Cow town with a silo.

The Washita Battlefield National Historic Site is a real nice museum and was free! We stopped and watched an informative video about the event. We looked at the artifacts and read some of the interesting perspectives of the times. There would be a recollection of a white person and a recollection of a native person showing the two sides of the same event. Very informative.

We then went down the road to the actual site. The river has moved since the original event but with a little imagination you can put yourself there that fateful winter day.
We took the two lane highways home. I can tell you as we came back into civilization I actually longed for the wide open spaces of the plains. The rest of the trip was uneventful and we managed to get home without dying.

Part One.
Part Two.
Thanks for reading and Happy Rovering.

250,000 Miles (Post #570) 1/23/2017

Two hundred fifty thousand miles. You can drive to the moon (238,000 miles), drive around the moon’s equator (6,786 miles) and have plenty of miles left to find a good parking spot with 250,000 miles.

That’s probably no big deal today when you are thinking about cars. I know several Japanese based autos that have clipped that. JagGuy got 340,000 miles on his Isuzu Trooper and has 300,000 on his Mercedes 300CD’s clock. Like I said no big deal for some manufacturers. But for a British made auto from the middle 1990’s that’s a big deal.

How do you get to 250,000 miles? The answer is lots of maintenance. You’ve seen the “tick sheets” for Land Rover maintenance. Most people don’t take their car to the dealership for maintenance after the warranty runs out. You are already paying 400-600$(US) a month to buy the Land Rover why would you pay 2000$(US) for a “service call”?

So after time goes by and those things get neglected suddenly you have a hose pop that should have been replaced 25000 miles ago and that can lead to even more trouble. Or how about a sensor that stops working optimally and starts to damage other stuff? Eventually you have to replace components when they fail.

Major components start to fail and cost quite a bit to repair. How about 2000$(US) for a transmission, or 1200$(US) for a transfer case. Air conditioning components don’t last forever either and are pretty expensive to get repaired.

I have long ago made my “last payment” on my car loan. As I tell my wife when I have to pay for a repair, “it’s cheaper than a car payment.” Indeed even in terrible years when I have replaced a transmission, averaged over 12 months its cheaper than a car payment on a new car.

So I will continue to drive my Range Rover until I can no longer find parts or some moron crashes into me and she is truly beyond repair. I’ll then find another and drive it until I can no longer find parts.

Thanks for reading and Happy Rovering.

Capulin Volcano and the Northwest Passage 2016, Part One (Post #564) 1/17/2017

Load Out

I really wanted to get out on the trail this fall and I felt like it was my turn to plan and lead a trip. I looked for a non-OU-Football weekend and found two one in September and one in November. The initial inspiration for the Capulin Volcano trip was seeing a similar trip in OutdoorX4 magazine. We had some interest in the trip from several people in the Oklahoma Land Rover Owners group but in the end only two of us made the commitment to the overland adventure.

Day One

Mr. Fisher and I got the Big White Bus loaded and started out on a pleasant Saturday morning and headed to our rendezvous with Erik O’Neal and his Discovery 2 in Okarche, Oklahoma. Continue reading “Capulin Volcano and the Northwest Passage 2016, Part One (Post #564) 1/17/2017”

Celebrate Freedom and Independence  (Post #561) 7/4/2016

My daughter RovErica captured this picture tonight. It’s kinda ironic, we are celebrating our independence from Great Britain today and I drive a British vehicle.

Happy Independence Day or as the British call it Happy Treason Day. Either way remember the sacrifices brave men have made to allow you to sleep under the warm blanket of freedom tonight. A lot of lives have been traded to give you that.

Thanks for reading and Happy Rovering.

Leaks? I think I’ll pass (Post #558) 5/14/2016

20160514_123423

We’ve all heard the jokes.

“If your Land Rover isn’t leaking you’ve run out of that fluid.”

I heard them all, I’ve even made up some of my own. But the jokes are all true. The only Land Rovers that don’t leak are still in the first 3 years of their life. Even then, I’m not entirely sure you won’t have a leak of some kind. The basic premise is, if you’ve cracked open a system, coolant, oil, transmission fluid, air condition, steering fluid, brake fluid, blinker fluid, it doesn’t matter, that system will forever leak from that day forward.

This year I decided, I’m not going to pour my hard earned money “through” my Land Rover any longer. You buy the fluid, you pour it whatever reservoir, and you see it on the ground in your parking spot at home, work, wherever you park. I decided I am stopping that now.

Earlier this year, I started with my power steering system. I got that sealed back up only to have the “O” rings fail and it leak out again. That’s fixed now.

I then decided that my oil leak needed to stop. I replaced my oil sump gasket and got that sorted. This will probably always “weep” but it’s not leaving a puddle and I’m good with that.

The last major leak is the coolant system. This is one you don’t ignore. You get an aluminum block too hot and you’re doing engine work. In this case I had my expansion tank finally give up. It had a slow leak in the seam. I sourced a new one and decided the coolant hoses were starting to resemble over-inflated balloon animals and needed to be replaced as well.

The filler tube nut was also past it’s life expectancy. I bought a brass one and another plastic one. The brass one was actually for my radiator but the plug there was soldered and would not be replaced. I used the brass one to clean the filler tube threads. That worked better than I expected.

I got the system filled and started looking for leaks. There were none in the things I touched. But I still had a leak from under the transmission. There are no coolant line back there I thought, “What the hell?”

I let the engine cool a bit while I solved all the world’s problems with Mr. Fisher. I then began what I hoped was not a leaking heater hose. The heater hoses that go across the top of the motor to the heater core are back there. That has to be where the leak is coming from.

20160514_123451

You can see the offending hose there on the firewall. The hose clamp is the one. Turned out it was not tight at all. I was able to turn the hose with my hand.

Getting it tight required pulling it off and replacing the hose clamp and combining various combinations of socket sets to get the socket on the clamp screw. Eventually I got it tight.

I had to fill the system again so that process was followed again. Finally I got done and started the engine up to get her back to pressure and hot to look for leaks. I also moved the Big White Bus down the driveway to spot new leaks.

20160514_123430

And to my surprise just as I expected there were no leaks. It was decided a maiden voyage to Hollywood Corners for lunch. On the way the coolant light decided it was going to notify me of a low coolant situation. I knew this wasn’t possible. Did I have an air bubble?

When I got the BWB back tot he hacienda I opened and saw the level in the tank was below the fill mark. I topped her off. I also decided to swap my cap for one I salvaged off one from the breaker’s yard.

So for the time being I’m leak free. And for the next 24 hours I’m going to be the only human on earth with a 23 year old Land Rover that doesn’t have any leaks. That feels good.

Thanks for reading and Happy Rovering.

Why 24 hours? Because I’ll drive her again tomorrow and I’m sure I’ll be planning how I’ll stop the new leak.