Encourage them (Post #168) 2/12/2010

For a moment I want you to think about how your Land Rover makes you feel. Soak it all in. No matter which model you drive, be it one of the modern classics like a 90s model Range Rover or a 1947 Series 1, you know how proud you are to drive it. You are proud because you know how much work goes in to keeping that beauty ON THE ROAD (or OFF as it may be).

If you are a steady reader you know there are probably two dozen issues outstanding on my 1993 Range Rover Classic LWB. Many of you have referred to your vehicles as “rolling restorations”, and they truly are. Finish one project and there is another to start and if this goes on continuously you qualify for the title of rolling restoration.

I have taken my Range Rover off-line one time for a restoration. It was 3 years ago. I needed to get a great many things fixed in anticipation of my daughter RovErica driving the Classic as her first car. Now while the logic of allowing a 16 year old to drive such a classic Land Rover can be debated, the repairs were long over due. We could also debate whether or not a 1993 Range Rover is even classic, but lets pretend it is for this argument. I could not imagine passing a Series vehicle on to a teenager.

The Range Rover Classic was just enough different from everything else in the parking lot and had a high enough “neat-o factor” that it would deflect the inevitable scorn of her classmates. When it started to show the two years of hard driving RovErica gave her, the neat-o factor digressed to the what a piece of junk factor.

Waving at vehicles is a man thing. Motorcycle riders wave at each other with a hand extended low about where the hands of a clock would be at 4 or 8. They are way too cool to wave up high. Jeep drivers wave to fellow Jeep drivers. Jaguar drivers wave at other drivers. And following suit Land Rover Drivers wave at fellow enthusiasts. I qualify that with the word enthusiast because I have learned that in only a few cases do women wave. I’ve been smiled at once by a woman I waved at. She was in a Discovery 2. In my experience, NO WOMEN wave. Women driving Freelanders, LR2 and LR3s or any of the new Range Rover models refuse to wave. Zip, zero, zilch. I’m not sure if it is self absorption or what, but they don’t seem to appreciate other Land Rovers. This will lead me now to conclude they are not enthusiasts.

Now compare that to when you see a Discovery heading your way and a fellow male of our species is driving, you will get a wave if they see you. You can almost gauge the involvement or pride by how they wave. They are probably at the very least an enthusiast and they might even be a hobbyist if the wheel wells are full of mud and there is any measurable amount of kit hanging off their Landy.

Discussing this with my wife reveals one universal constant. Women are not automobile enthusiasts. For the most part women don’t really care what they drive. My wife, like many women, does not understand the male fascination with cars or even motorcycles for that matter.

This year’s snow storms here in Oklahoma often clear the roads of the casual driver. Your Land Rover to Everything else with tires ratio goes up drastically. This is expected, as road clearing in Oklahoma is more of a hobby of a municipality than a mission. And if the cars in your driveway were priced at 60,000$(US) or more you are 34.67 times more likely to have your neighborhood streets cleared by the city than any of the “other areas”. Squeeky wheel gets the grease, etc…

So the road conditions often dictate the vehicle you drive. Ground clearance is everything. My son’s Scion xB sat idle for six straight days. When you venture out on the snow covered roads you see a lot of Jeeps, Toyotas and pickups. This is when you see the Land Rovers. And this is when you see the enthusiastic Land Rover drivers.

You will get waves and driver’s often point and give a thumbs up when they see you passing the opposite way. They know you are in a capable vehicle. They also know that it took a lot of work to get your Land Rover out on the road to drive down to Braums to get milk.

I have found myself lately recognizing other classic vehicles on the road. And this is where I tie the whole theme together. Encourage the brave men who choose to drive a rolling restoration.. If we are to see the truly classic cars on the road we need to encourage the drivers when we see them. Tell them you like their cars. Give them a thumbs up.

One of my favorite shows on the air today is Wheeler Dealers. I’ve mentioned them before. Mike Brewer and Edd China buy and restore iconic cars (60s, 70s, and 80s) and then try and sell them on for a profit. I them on my local HD cable provider on the HD Theater Channel. You can watch these guys take a beater of an auto and transform it to a usable daily driver.

You can follow the rest of the show by going over to Youtube. Its a great show and it follows the theme here, keeping the classics on the road.

I have seen a few classic cars lately that are really great. I’ve gathered a few pictures of vehicles that are similar so you will know what I’m talking about. There are others driving around the little burg I live in. These are the latest I’ve seen and were fresh in my mind.

A classic Ford Falcon is now buzzing around Norman. I pulled up next to him on Porter Avenue and with my window down I told him I

really liked that, with a point, and said good job. His reaction was to smile and say thanks.
Ford Falcon   Wagon
My best friend drove a Ford Falcon in high school so these vehicles have a special place in my heart. The difficulty of keeping it on the road was evident the moment you got in. The passenger side floor board was completely rusted out and a speed limit sign had been commandeered to serve as a floor board.

Just this Friday morning I saw a 1965 Chevy C10 blazing down I-35. It looked even worse than this example. I rolled up next to him and drove next to him until he noticed me. I gave him a big thumbs up. The smile on his face was indescribable. It was obvious that this truck represented something special to him. It looked like a labor of love as well. The panels were mostly straight and it was in need of a paint job.
1965 Chevy C10

When the snow was falling yesterday I saw an 80s model Jeep CJ7 on the I-40 MLK off ramp. He had a high lift jack mounted next to the external spare tire. He had a winch on the front and this Jeep looked like it was well loved and well used. The scruffy fellow behind the wheel smiled and waved when I pulled up next to him and pointed and mouthed “I liked that”.

So as you are driving around waving and recognizing your fellow Land Rover owners, give a shout out to those other auto enthusiasts that choose to drive other classic rolling restorations.

Thanks for Reading and Happy Rovering.

A few more things (Post #144) 5/11/2009

So I’ve been driving the Range Rover this week, on and off. And I have some additions to the “little list” in the previous post. It’s amazing all the things you forget when you don’t drive something everyday.

Additions:

  • Driver’s side door latch is mostly failed.
  • Code 69.
  • Central locking system is toast.
  • Rear center brake light non-functional.
  • Passenger side seat leather beginning to split.
  • Carpets need to be cleaned/replaced.
  • Cupholders, lack there of.
  • Power steering lines leaking.

Getting out of the Big White Bus (BWB) is quite a challenge these days. My daughter has been just jerking on the door release several time very hard to get the door to open. All that is needed is to pull the door to you and then pull the latch. In either event the door needs to be sorted out and possibly the driver’s side door latch needs replacing.

Code 69 has popped up on the on board diagnostic display. That is the position sensor for the automatic transmission lever. In addition to that failure the high-low transfer case lever does not move due to a common failure with the solenoid failing. I had forgotten about that problem. Looks like I will be underneath the middle of the truck for a couple of problems.

The fob to unlock the truck has been not locking the door locks. The weak state of the actuators is probably to blame. I really like pressing a single button and listening to the doors lock. This will be one of the first things I need to sort out. The central locking system is going to be very important if I am to upgrade the sound system.

The rear center brake light stopped working. I know I hooked it up, but I’m pretty sure the slamming of the upper gate by my daughter, knocked the lamp loose and probably damaged the bulb.

No amount of leather feed/leather conditioner is going to stop the passenger side seat leather from splitting. I tried to condition it again this weekend, but until I get the tint on the windows its probably all for naught.

Who doesn’t like clean carpets? The carpets in the BWB need to be cleaned or even better replaced. I’m not sure I have the budget for that so it’s a low priority for now.

The lack of cupholders was pretty evident the last time I drove the BWB as I watched my cellular phone slide off the dash and out the window. Just kidding it just slid into the dash cubby but it scared me just the same. I have invented my own style of cup holder and am debating whether or not I turn a couple more or just install my spare Discovery cup holders. The jury is still out on this one.

The perenial power steering leak is still there. I haven’t bothered to just replace every hose. It doesn’t leak all that much, just enough to make the bottom of everything wet with fluid.

Well that’s about it. At least that’s all I could come up with for now. I’m not sure if I’ll find anything else after I start driving her. As right now if I had all the money for repairs, it would take me 10 days to sort it all out, if I did nothing else. Once again the term “rolling restoration” works very well for the Range Rover LWB known affectionately, once again, as The Big White Bus.

66,666 (Post #79) 7/29/2007

With 66,666 miles rolling past on the odometer a couple of problems have popped up. I have had the dreaded “Three Amigos” light up on the dash 3 times now. Each time they pop up I seem to be applying my brakes on bumpy road surfaces. And each time I stop the Disco and shut off the engine, when I return to start her up again they are gone. I’m sure it’s the brakes as I have a squeeking pad somewhere on the vehicle. I purchased new pads that should arrive this week.

I also have been getting the Service Engine light. It stays on for a few hours but it has not stayed on continuously. So I purchased an Innova Equus 3130 code reader.

I got it for a good price off of eBay. This model allows you to get live data from the vehicle while it’s running. The sole set back at this time is the RS232 cable it shipped with. Most modern computers don’t use serial connections. So I’ll have to buy a serial port for my computer. Hopefully I will be able to catch the code the Disco is throwing and get it corrected.

Other than these slight annoyances I have been happy with the Disco. I really enjoyed the air conditioning on the drive home from the 35 and older Senior Division softball tournament I play in on Sunday. Our team was terrible, but what did we expect for one practice with 6 players showing up. Several of us had not even played this year. I saw guys out there that I played with 15 years ago, and I know they still play twice a week at least.

I have lots still to do on the Rangie, including getting the bushings swapped, the exhaust, recharging the air conditioner and the rust on the lower tail gate. Those are the three big projects I still haven’t completed. I’d like to replace the head unit in the sound system and have seen some Range Rover II radios for as low as 65 bucks on eBay. The original unit can be repaired for a cost of around 200 and I’ve gotten quotes for about the same amount for another one. Thats a bit pricey considering what you can buy in the retail shops.

Thanks for reading and happy rovering.

February 16th, 2007 (Post #71)

February 16th, 2007


A nice drive.
I took the Disco down to do some work for JagGuy in far Southwest Oklahoma. I wrote about it and posted it A Nice Drive.

Restoring the Rangie.
Started putting the calipers together. It’s pretty scary to me to think this work will be tested when I try to stop. The brake fluid is taking the Self Etching Primer off. I thought it wouldn’t. But I was wrong. I’m not sure how I’ll clean that up.

I have one of the swivel seals replaced and put all the way back together. I’m going to do the other side and try to photograph every step. Which there are many. But when I’m done I’ll have a complete tear down and reassemble of the hub to the swivel seal. Hopefully that will help someone out someday.

I also wrote up the Ice Storm of 2006.

Hope you enjoy the read.

February 5th, 2007 (Post #70)

February 5th, 2007


Restoring the Rangie.
Took the brake lines off this weekend. I took the hoses down to Hoseco in south Oklahoma City.
JagGuy recommended them and so I took the old hoses down there to get the new hoses made. I had them put an extra 3 inches on the hose to allow for a lift kit if I choose to go that route in the future.

I also cleaned up the brake calipers for the paint job. I really wanted to paint the calipers or have them nice and shiny clean. Well after cleaning on them they cannot be cleaned back to shiney. So I am going to paint them. The fact that brake fluid will strip an and all paint off made that a challenge. So JagGuy suggested that I use self etching primer. It will be gray. I bought Mar-Hyde Self Etching Primer. I bought it at O’Reilly’s Auto Store. I can live with gray considering after a few months I’ll be surprised if I can tell I ever painted it.

I am dreading the swivel seal replacements. I really didn’t enjoy those jobs the first time. This time I get the added fun of it being cold in the garage while I do it.

I’m running out of weekends to get projects done. I still have to do the painting and I also have to get the drive shaft on the Discovery replaced and do all that drive line stuff. I need the lift to make that an easy job. And it right now has an Isuzu Trooper on it. I just need to schedule a day and get it down there. I’d like to have that done before I drive to Houston to take care of some family business.

January 22nd, 2007 (Post #69)

January 22nd, 2007


Cadence Marie is doing well and growing like a weed.

Restoring the Rangie.
Did a bunch of work this last weekend on the 93 LWB.

Headlamps
Replaced the head lamps with some Hellas. They are sweet. German engineering in da house! I love that commerical for VWs. Check it out.

Heater fan resistor.
Replaced the resistor for the fan. It’s located in the vent cowl. Nice place to keep it cool but
a horrible place due to water and rust and such. The replacement was no picnic. But wasn’t as bad as I expected it to be. I think I’d recommend anyone tearing out the dash to replace it when the have it all apart. The instructions say you can pull the plug out through the hole but that was not the case.
I’ve finished the write up on the Heater Fan Resistor. Check it out.

Brake Calipers.
I have the brake calipers off. They are soaking in a bucket of diesel in the garage. I want to paint them but not sure how that will go yet. The kit is coming in this week to replace the seals and such. You can check out my progress on the Brake Caliper page.

Swivel Seals.
I ordered the swivel seals. I’m not looking forward to tearing that apart again but it must be done. Maybe this next weekend I will tear them down. OR at least one of them as they are no fun to work on. You can see some of that work here on the Swivel Seal page.