The Highlander, drives a Range Rover Classic.
A Good Long Trip (Post #197) 8/31/2010
The week began with an offer to sell my spare Discovery II rims to a chap named Shaun in Colorado. We worked out the details in the emails we exchanged and it was agreed we would meet in Clayton, New Mexico to swap currency for magnesium.
The shipping cost for the rims was almost as expensive as the rims were themselves. With this in mind I told the perspective buyers I’d meet them in any state surrounding Oklahoma. This worked out great for Shaun as we both had about a 6 hour drive to meet halfway. I love the northeast part New Mexico and this gave me an excellent excuse to drag my wife kicking and screaming take my wife on a nice day long car ride. We both love to drive and it was a good excuse to be together for a whole day of alone time.
So off we went. The first two thirds of the drive are (yawn) pretty boring. We’ve been down this stretch of I-40 so many times I can almost tell you which restrooms are the cleanest in any given season. The fact this stretch is along the “Mother Road” aka Route 66 is the only redeeming quality of the drive. The first segment terminates in Amarillo, which we have deemed, “a stinky little town”. Amarillo is about a third of the size of Oklahoma City. I thought it was bigger than its actual size, but I was wrong.
The second leg begins with a drive through the Canadian River valley north of Amarillo. This stretch then becomes a pool table of corn fields and long stretches of corn and silos and the occasional windmill.
When you finally reach New Mexico you can see an immediate difference. First of which you are out of the hell known as Texas, the second is the dormant volcanoes. In deference to Texas, I personally like the Texas panhandle. It is affectionately know as the llano estacado (Wikipedia). There are lots of stories to translate this name most of them are not true. What you can and should know about it was written by Spanish conquistador Francisco Coronado in 1541, from the Wikipedia site…
“I reached some plains so vast, that I did not find their limit anywhere I went, although I traveled over them for more than 300 leagues … with no more land marks than if we had been swallowed up by the sea … there was not a stone, nor bit of rising ground, nor a tree, nor a shrub, nor anything to go by.”
That’s just about as accurate as you could ask for. Today some of the most interesting things to see are totally abandoned houses and a basketball gymnasium in Perico, Texas.
A good part of the book Lonesome Dove by Larry McMurtry takes place on these plains. That is part of the appeal to me along with the regions vastness and quite honestly the wind. I love the wind blowing and here it blows constantly. The land is inhabited by an honest and hard working people who are fiercely proud of the land and its lifestyle.
On into New Mexico you begin to see the plateaus and mesas and dormant volcanoes mentioned earlier. The first thing worth stopping at along this route is Clayton, New Mexico. Our intenary had us meeting Shaun and Deb in front of the Ekland Hotel in downtown Clayton. Our plans were to eat a big lunch in the Ekland Hotel restaurant, relax a bit and then head home. We kicked around staying overnight, but gave that up to maximize the funds from the trip to apply to the repairs of the Range Rover LWB. You can see the Honda CRV parked in front of the hotel.
As it turned out, our plans would not have panned out anyway. The Ekland was closed. Mrs. OkieRover visited a shop next door and learned they have been closed for a year. There is a rumor of an investor taking over the place and opening it back up. Money has exchanged hands…nothing has come of it as of this writing. It was a disappointment but then again not too disappointed as we had already adjusted the plans once.
While we waited for Shaun and Deb, I walked around Main Street and took some pictures of the buildings. The Luna Theater, a coffee shop, a grain elevator, City Drug, a barber shop, all the quaint shops you would be disappointed NOT to see in such a town. I even took some pics of the empty restaurant.
Check out all the shots I am posting at my Posterous site. This is a new addition to the OkieRover.com web presence. Alyssa Milano uses Posterous, so I know it’s good.
The town was mostly abandoned due to Old West Days, which was being held a block over. I took a few more pictures and as expected Shaun and Deb showed up in their Range Rover. Their Range Rover was a very nice Callaway edition. It was numbered 007 of which the coolness of that alone need not be explained on this site.
We loaded up the rims. Shaun, like myself, hates to hear noises from the cabin so he was careful to set the rims in such a manner as they did not ding. Deb pointed out that while offroading in their Defender Shaun asked her to, “go back there and find out what is rattling.” I thought that was a very funny story. As I am exactly the same way, I can’t stand load noises. I can safely tell you I would complain about the noise of a truck full of my own gold bars.
I brought along my Discovery II head lamps and a CD magazine hoping that his Range Rover would be able to use them. Sadly neither met the mark and I’ll have to find another person to pass them along to.
Shaun told me he was to use the rims for a set of studded snow tires. The Colorado winters bring with them some ice and snow and a second set of rims and tires for just such weather, I imagine, is a necessity. He said he would run them for the two icy months and then back into the garage they would go. I told him about Nitto tires and their reputation as good ice and snow tires. I’ve read about them on boards and have heard they were good. As I realized later, this was like telling an Eskimo about snow being cold. Shaun was very polite and didn’t tell the “flatlander” how clueless he was sounding.
Our wives shared stories while we packed the Range Rover. We shared some more about the plight of his Defender and its transfer case problems, my Range Rover’s current state of disassembly and the awesomeness of this area. My wife shared that she never tells her dad about our travels until we are home due to his worry that we will be left in a ditch somewhere with our throats cut. We all had a laugh about that.
They noticed I was taking pictures and directed us to a dragon sticking out of a wall on a building’s façade just a few blocks away. We then jumped in our cars and headed up there for more pictures. Deb shared with us that the artist was just across the street.
We bid each other goodbye. They like ourselves, they had other plans for the day. As we pulled out of town my wife and I talked about how awesome a couple they were. Shaun had told us about the Land Rover National Rally being held in Moab and that the Solihull Society was the host club. I’m not sure I will have the Range Rover ready for that this year. It was comforting to know at least two people we really liked would be at this event should we choose to go in the coming years. I hope this meeting with Shaun and Deb would not be our last.
With our lunch/relaxation plans ruined I decided we should go north to Black Mesa. It is the highest point in the state of Oklahoma and a place all OKIES should see and or experience. So we headed north on New Mexico Highway 406. Remote is usually a word we use in Norman to describe a device we use to change the channels on the television. Remote in this part of New Mexico is an understatement of long stretches of highway with no noticeable inhabitants.
At one point we drove for what seemed like an hour and never saw a car in any direction. The weeds grew right up to the pavement causing a tunnel affect in some places. This section is part of, or crosses the Santa Fe Trail. This is one of the trade routes to Santa Fe from the east. The route was used by trappers and traders throughout the fur trade from around 1822 through the 1880s when the rail road came to Santa Fe.
As we moseyed up the trail, I spied an abandoned house. It was close to the road and I decided to explore. It was most likely an early 1900s home. Fairly large considering its location. It was obviously a wealthy person’s home considering the size and appointments inside. The lath dated it for me. Lath walls were used between 1910 and the 1950s when the use declined.
I took a few shots of the inside while the cows stared at me. Realizing I hadn’t brought a feed truck they went back to doing what cows do best, that being making themselves in to tasty things to eat. I finished filling my socks and laces with burrs and got back to the car and we proceeded on up the highway.
We passed miles of cows and pasture only interrupted by a couple of fences and a cattle guard or two. Short of a cowboy working his cows in pen we didn’t see another soul until we reached the “valle escondito”. The road dropped sharply to traverse a nearly dry river. The canyon was picturesque. We passed a couple of pickup trucks along this section. The best part of this section was if you saw something you wanted to take a picture of, you could just stop, RIGHT THERE ON THE HIGHWAY, and take a picture, or twenty. We were truly alone.
We crossed back into Oklahoma. At this point our camera batteries died. I was pretty sure they wouldn’t last the entire trip but I didn’t expect them to die in the middle of the most remote and picturesque parts of the trip. Live and learn I guess.
We sped along until we reached Kenton, Oklahoma. We stopped at this “store” and inquired about batteries. They had nine volts and “C” and “D” cells but no “AA” size. There was very little in the store and we layered on to our disappointment that we couldn’t photograph the town. It was decided that we would have to come back.
We drove up the road to Black Mesa. More nothing in the middle of nowhere. We did manage to run over a four foot rattlesnake. I tried to miss him/her but it was unavoidable. I’m pretty sure there was no shortage of rattlesnakes in this part of the world so only a few alligator tears where shed.
After Mrs. OkieRover noticed we ran over a snake she began to panic about the snake getting in the car with us. It was hard to contain my laughter as I tried to ease her mind that the snake, no matter how dexterous, could not get IN THE CAR after we had just run him over at 40 mph. My mind immediately started thinking about titles for a movie of such an event. Snakes in a CRV was the first to pop in to my head.
We weren’t quite sure what this building was all about.
View Larger Map
It was totally unused and did not even have a drive or parking lot. I’d love to know who thought this would make a great destination for such a facility. It has lots of potential obviously, but someone pulled the plug on the project before it even got going.
We drove on up to the trailhead for Black Mesa. I read that the hike to the top is 4.2 miles and takes anywhere from 3-5 hours depending on how manly you are. Mrs. OkieRover confided that she was “not the hiking type”. She would not be hiking up. I think the thought of snakes have her a bit shook up.
I got back to the CRV after reading what I could of the information sign which is in need or repair or replacement. I programmed our route home on the Tom Tom. It told us we were 9 hours and some change from home. NINE HOURS???! Mrs. OkieRover was none to happy about that. But it was what it was.
There is a discrepancy between what the Tom Tom says the travel time and how I drive. I am guessing if you drove the EXACT speed limit all the time you would go insane arrive when the Tom Tom says you will. But me, being the Marine that I am, will not be told when I am arriving. I arrive when I want to.
I turned the CRV into the wind (metaphorically speaking that is, as the wind was technically out of the south at 25mph) and headed home. We clipped Boise City and headed south back into hell Texas to pick up the Mother Road/I-40. I set the cruise control to somewhere around 9 miles an hour over the posted speed limit.
This works pretty well for us. A highway patrol friend of mine said he wouldn’t even turn the car around for 9 over. 10 over, that’s speeding. But 9 is debatable. At times I pushed the CRV up to nearly 100mph. The uninhabited panhandle doesn’t exactly have a lot of cars on the road. So being careful to pick stretches I could see for a long way I would cut some time off the trip.
I was cutting several minutes off for every mile I was driving. Before too long the Tom Tom was telling us we would get home around 11pm. When we pulled into the drive way I had gotten us home in a little over 7 hours. That’s not too bad.
We averaged around 25mpg in the CRV. The brand new Yokohama Parada Spec-X tires were quiet and handled well. I’m pretty sure the name “Parada” was chosen because it matched the head designer’s Brazilian girlfriend. They were at the time of this writing number one in their category (round rubber things mounted on rims). The actual category is Street/Sport Truck All-Season Tires. Hopefully the tires won’t break down like the Geolanders I bought in 2001. The sidewall broke down too early and the Range Rover looked like it was driving on clown car wheels. Those Geolanders only went 40,000 miles as well. That was pretty disappointing. I’m hoping for better this time around.
We (I) drove somewhere in the neighborhood of 850 miles. We left at 8am Central Standard time and got home around 11:00pm. It was a long trip but a good one. We both felt like hammered jello the next day. Mrs. OkieRover recovered by taking an afternoon nap. I recovered by putting the differential back in the Range Rover and hooking up the drive shaft.
Don’t forget to check out the pictures posted on my Posterous site.
I highly recommend visiting this region of New Mexico, I loved the remoteness and could in the back of my mind image the hardy men and women who once traversed this trail. They made 10 miles a day with wagons and that was on a good day. If we had the Range Rover on this trip, making 10 miles a day off road would have made this trip even better.
Thanks for reading and Happy Rovering.
Rust and Relaxation (Post #190) 7/28/2010
I’m almost ready to start on the repairs of the holes in the floor pan. I have read some websites that gave some direction for this kind of repair. I have also consulted with the Evil German Dude about the repairs. The general concepts have all been thoroughly hashed out.
I general idea is to cut out the holes. Then you make the patches to fit into the holes. The idea is to cut away the rust and to replace it with a patch that extends at least an inch over the edge. At this point you weld it and seal it.
It sounds very simple in concept. But the details and techniques are the devil, and thankfully, I have a legitimate evil source of assistance and believe this will go with little trouble.
We worked all this out recently by making a model of the project out of paper. Not a full sized 1993 Range Rover LWB, just a small concept model of the floor pan. I’m obsessed, not crazy.
The Evil German dude has a nifty tool that does the crimping and bending. It called an air punch flange tool.
It bends the metal and has a punch to pop holes in the metal for welds. EGD assures me this is “no big deal”.
The absolute hardest part will be getting the metal cut out. There are some vital systems below the floor in the areas that need to be cut out. This will require careful cutting. EGD says you can use the cutting wheel on an angle grinder to “score” the metal weakening it and then using a screwdriver or chisel complete the cut.
At the cost of an 16 Gauge Air Nibbler 25$(US) or a pair of Inline Air Shears 30$(US) perhaps we might consider another tool. I haven’t even asked JagGuy if he already owns either of these tools and would he be willing to lend them to me.
![]() |
![]() |
I took the passenger seat and electrics out of the Rover over the weekend in order to investigate the rust on the long seam. It was a birds nest of wires under there. With the Electronic Fuel Control computer removed it is easy to see how it could be move to the under side of the dash. The thought here is to get it even further away from water in case of a river fording. There were some plugs unplugged and I’m not sure what they were. The rust is bad but no holes yet. I will grind off the protective undercoat and clean as much rust off as possible and paint everything with Rustoleum and or acid etching primer.
I know at this stage I should not have visited the HarborFreight.com website as I see right there that a 90 amp Flux Wire Welder is on sale 149.99$(US) to an affordable 99.99$(US). That’s a hell of a deal. Too bad I don’t have any money right now.
90ampfluxwirewelder.jpg
Oh well. It’s not like this is the first tool I’ve wanted that I would only use once or twice (a year). If I had a “real shop” I’d be all over this deal.
Before all this lovely work is to begin though, I am going to take some R and R and visit a beach. If I had known the oil had not fowled the beaches in Mississippi I would have made for that coast post haste. First because I’ve never been there but the brochure looks nice. Secondly, I think it would be nice to help with the economy down there. Not that BP won’t be kicking in, but its not the same.
I heard an NPR report that said tourism was way down in the region, yet nothing was wrong with the flour white beaches. I also heard from an online poker buddy that the cost of shrimp and seafood was not bad and was only up just a bit in cost. Not that it matters to me, as I eat the seafood no matter what they charge for it.
Well, here’s to some rum and relaxation. More as it develops.
Thanks for reading and Happy Rovering. One more for the road…
Panel rust and rust in the cargo area (Post #189) 7/20/2010
Welcome back dear readers. Multiple post in one week? What is wrong with me?
As promised in yesterday’s post I said I’d come back with the pictures and descriptions of the rust in the rear of the Range Rover. So here it is.
I have always seen the rust bubbling up on the rear of the Range Rover. I vowed I’d get to it eventually. Eventually is here. If you see rust in one place, its a good idea to look for it in other places. That couldn’t be more true on a Range Rover Classic.
A note here about quality. I find it entirely unacceptable to produce an automobile that is as capable of off-road adventure like this…
…and then to fail to use materials that protect it from the elements. The rubber pads and bits and pieces that cause water to be trapped against metal and allow rust to take hold is unforgivable. If you intend to use your Land Rover for these kinds of activities, take it apart and coat the entire thing in some sort of water proof bed liner, like Line-X or Rhinoling. You’ll save yourself hours and hours of frustration later.
Back to the tailgate rusting. I decided, if there was rust on those parts, what on earth would I find if I pulled the carpets off. Well I’ll tell ya, more rust. Rust on a scale I did not expect to be quite honest. The rear tailgates of the Range Rover are not noted for their water tight seals.
What I found under the carpets disappointed me greatly. The good news is that as I posted yesterday, my best friend JagGuy said, “…that ain’t rust.” His observation was a comparison to the rust he finds on his Jaguars and M35 trucks. Compared to them I was mostly rust free! We know that is not the case.
The treatment for rust is to remove it with extreme prejudice by all means in your power. For that I bought an angle grinder and some aggressive wire wheels. On advice of the Evil German Dude I got a Makita from Home Depot. You can see the ear plugs in the lower portion of the picture and wearing more or less protective clothing is a must. As always, wearing goggles is key to not wearing an eye patch pirate style for the rest of your life. Patches used to cover your empty eye socket are albeit very cool and interesting conversation pieces do not help you gauge distance while driving.
The angle grinder has more than paid for itself in time already. After getting the discs for cutting and the wire wheel, I’m out about 75$(US) for this time saving device. The honest truth about it is, I don’t have the patience to use a wire brush vigorously enough to bare metal.
JagGuy suggested I get a brillo pad like wheel and just use that. I have a new air grinder and attempted to use the brillo pads. They worked pretty good but they were not getting me down to BARE METAL. Besides that I could only use the air tool for about 5 minutes and then I had to wait for my compressor to catch up. My Campbell Hausfeld air compressor is louder than its small size would indicate. When it is running you can’t hear The Clash belting out their motivating sounds. In defense of the other rust removal methods, you can’t hear the music with any of the power tools in operation. My air compressor was hot enough to melt the plastic covers when I retired it at the end of the first day.
As before there is a pre-picture and a post-picture of each area. Keep in mind I will hit everything one more time with the grinder for good measure before painting with acid etching primer. The flash lights up rust nicely and you can see the parts I missed in some of the pictures.
The question remains, which product to use for the rusted through parts? Waxoyl or copious amounts of Rustoleum? This is where you have to apply serious amounts of patience. The Rustoleum approach is using ridiculous amounts of paint, to the point it drips off the parts and then waiting at least a week for it to dry. Waxoyl is not a product I’ve used before so further research is required.
My plan is to remove as much as possible with tools and use acid etching primer. On those parts I can’t get tools on or paint directly on, are the parts that require the products listed above. There is a healthy amount of “how much of this is seriously necessary?” going on as well. It is a 17 year old Range Rover. As all cars do, it will rust. Eventually you have to get to the “this is silliness” level of labor and move on to “thats good enough”.
So from that you can conclude that I’m probably not going to do this job again. Anything short of me putting my foot on the floor board and it extending through the floor Flintstone’s style I’m most likely not going to be doing this level of project on the beloved Big White Bus. This vehicles function is to haul stuff. Primarily to haul me, to and from historical events and hopefully my family on a couple of camping trips this coming fall or spring. The mechanicals are far more important than the cosmetics. Momma likes her air conditioning if you know what I mean.
After all the primer is applied I have sourced a company in Norman to buy matching the white paint of my model year and they have a clever method of getting it on to the metal. More on that when I get to that stage.
Lets look at some rust!
Bed rear from the driver’s side to the passenger side.
|
![]() |
![]() |
I cut back the pitted and rusted metal parts on the gutter portion seen above. I will just paint this and clean up the edges a bit when I’m done. None of this is visible after the carpet is put back in.
Inside the cargo area.
|
|
|
|
|
|
Oxidation from the roof and the outer panels
The oxidation will be taken care of with a buffer and some Meguire’s. I also found some mildew under the rear bench on the bed. This is not surprising from the amount of wet gear we packed in the back during the second consecutive Fourth of July rain out at the Norman Day celebration. I have made it a habit to wipe everything down with paint thinner before continuing. So there will be no organisms living back there when I’m ready to paint.
The next post will get me totally caught up with the pictures and work I have done so far. I will show the work I’ve done on the tailgate, which you are all aware is a famously rusty bit of trouble for Range Rovers Classics. When Edd China was restoring the Range Rover for the Wheeler Dealer show he just replaced the entire tailgate in leiu of wasting the time to get the rust out and off.
You can catch the rest of the episode if you are interested by using the links on the right side of the YouTube page. This is from part 2. He (Mike) sources the tailgate and door from a breakers yard (how quaint) at 7:20 and replaces it in the ninth minute.
Well that gives you a ton of material to look at and roll around until the next post.
Thanks for reading and Happy Rovering.
Garage preparation complete (Post #187) 7/14/2010
I set out on Saturday to get started on the now infamous Range Rover Restoration Part Duex. Hopefully it will be slightly more popular at the box office than the first restoration. Sometimes sequels don’t have near the success of the first episode.
I can site a few examples…
- Breakin’ 2: Electric Boogaloo
- Caddyshack 2
- Highlander 2: The Quickening
- Grease 2
So with those stinkers out of the way, I’m hoping this sequel will be very successful, much like these sequels, that were better than their respective originals.
- Christmas Vacation
- Mad Max 2: The Road Warrior
- Star Trek II: The Wrath of Khan
- Star Wars: The Empire Strikes Back
- The Godfather: Part II
- Aliens
So to get a production like this off the ground and guarantee success we have to hire great actors, we have to have a really great script, we have to prepare the garage for the beloved Range Rover.
I needed to move a lot of items to make room. I took the giant rocking chair back to mom’s house. I moved the historical reenacting stuff back up to the attic. And I basically just organized all the rest.
Now I know you are looking at that picture and saying, “You call that organized?” Here’s the deal, I couldn’t afford a “garage system” when we moved in. I wasn’t even sure what I needed and wasn’t about to drop a few grand for the fancy cabinet systems and have them under utilized. So I got some shelves and made due. I don’t even have a work bench. That is definitely one thing I miss. So with that said, there is a method to the madness, lets just hope I don’t have a stroke and forget where I put stuff.
| In my neighborhood people use their garages as second living rooms, especially during the football season. I started to add some furniture so I could “entertain”. But me, being me, I just couldn’t have any furniture. So I made a chair out of an old Range Rover seat. | |
| I also added the bench and driver’s chair from an M35. I have many fond memories of driving trucks in the Marine Corps and therefore I snagged these from one of my buddy’s M35 projects. |
I couldn’t just toss these or bury them when the project started so I moved them to strategic places so they would still serve some function in the garage.
After I got the major items sorted and moved, I checked my supplies to make sure I have enough to get started on a project like this.
Beer? check. Soft drinks? check. Mustard? check. Giant jar of pickles? check. Music?
What kind of music do you listen to when you restore / work on your Rover? I prefer the classics. So I broke out a couple of my favorite greatest hits albums (she how I went old school there with the terminology?). The Essential Clash and The Cars Complete Greatest Hits.
How can anyone work on a British auto and not have some Clash on hand?
London’s burning! London’s burning!
All across the town, all across the night
Everybody’s driving with full headlights
Great stuff, good times, good times.
Okay back to the project at hand, getting the Range Rover into the garage. I moved the parking lot of cars from the driveway and lined the Range Rover up and moved her into her new birth for the next few months. Just like the last time, she fits.
She’s snug. I’ll have to work around the mower location and many items will need to be stored on top when I start stripping the interior out. But she’s in there.
I’m still considering a storage shed for some of the items I store in the garage. All the camping gear, the table saw, the furniture items, the wood scraps, the mower and trimmer, the fuels, the weight bench my son never used but we had to have (rolls eyes), all that could go into a storage shed and free up a “shit ton” of space.
Immediately I know I need to rethink how I am lighting the garage. More light is almost always a good idea. I need to look into some lighting options.
Well that’s it for now. I have already begun work and assessed the problems and have a couple of new ones to add to the list.
- Sound deadening in the rear and under the bonnet (hood)
- Rust removal and rust proofing
I’ve already discovered those two problems that I hadn’t thought of previously. I’ve always wondered why it takes people 2 or 3 years of work to restore a classic car. When you start on one you quickly learn about the huge amounts of time that “the little things” take up. Every little thing has to be addressed. And you can never estimate all the rust you will find. All of it has to be removed with extreme prejudice or you will just be back in there again removing what you probably should have taken care of the first time.
I will probably be a Waxoyl and Rustoleum expert when all this is done. There are a great many other new skills I’m going to have to master as well. Welding, body work and painting being three that immediately come to mind.
Thanks for reading and Happy Rovering.
Real close to starting Range Rover Restoration Part Duex (Post #186) 7/9/2010
I’m getting real close to (or as we Okies say, I’m fixin’ to) moving the Range Rover into the garage for her latest restoration project. The infamous Range Rover Restoration, Part Duex: RovErica’s Revenge. I say I’m “fixin’ to” start the project because I am determined not to use my wife’s side of the garage to store the crap valuable items on my side of the garage. Currently I have a full size box spring for a bed, a giant rocking chair, a box or two of miscellaneous glassware, a book shelf, all my reenacting gear (in stackable tubs), and several other loose items on my side of the garage. There is no room for a restoration project.
Should I have a garage sale? Probably. Do I hate to have garage sales? Definitely. I am waiting for the garage sale because I know when we start working on my mom’s house there will be tons of stuff to sell at a garage sale. Why have a little garage sale when a bigger one will be better?
So I will get the kids to help move the reenacting stuff up to the attic where it was before I used it back in April. I will reorganize the other items and reduce their floor space foot print. Once that is done, I can move the Range Rover in and get started.
Get started? What are you going to do OkieRover? That is a great question oh gracious and loyal reader. Let us begin by describing first why anything has to be done at all. Maintenance, that’s why. When you allow a sixteen year old to drive a 15 year old vehicle of British manufacture, things magically stop working. I know that is hard to believe with kids as great as mine but it is “a true fact” as Diet Mountain Drew would say.
When you can’t get to the vehicle because:
- it is busy being a taxi for a dozen children who’s parents were smarter than to give their kids cars,
- it is sitting in front of some kids house while your daughter is putting around in that kid’s car because, “Oh, I forgot to tell you, the air condition isn’t cold any more.”,
- it arrives home each day on average about 25 minutes after you have gone to bed,
- and lastly, because you are only allowed two sentences each time you see your daughter exit the house on her way to work or somewhere else she is late to, and you are sure as hell not going to let her forget to clean her room and do that random chore you asked her to do yesterday before the door shuts and she is gone again. You don’t waste those precious moments on, “how’s your car running?” Which almost always elicits a response like, “Good! That weird noise it was making for the last 3 weeks finally stopped yesterday.”
See, kids don’t equate noises with problems like mechanics do. Just listen to one hour of Car Talk on your local public radion station Saturday. I dare you. Hell, I double dog dare you. I swear I hear the brothers ask the caller, “How long has it been making that noise?” at least 10 times per show. And almost every caller responds with the same answer, “oh, I’d say aboot
These clueless callers think their mechanic or in my kid’s case, daddy, can sense any automotive problem with his amazing super powers 30 miles away, at work, talking to callers who’ve locked out their accounts on the system for the fourth time that day or can’t remember the password you gave them ten minutes ago, while listening to The Beat Farmers Radio station on Pandora or my Those Darlins CD, while thinking about the roast beef and provolone sandwich he is going to enjoy at VZDs when lunch time rolls around. All the while dreaming up things to blog to you about. (I know what you’re thinking, yeah, I’m a busy guy.)
So after a couple of years of this behavior things get beyond fixing pretty fast. Let’s us now compile a list of just the things I can remember right off the top of my head. In no particular order:
Viscous Coupling
Sun Roof
Brake Discs
Brake Reservoir
Air Conditioning System
Bushings
Sound System
Cosmetic items inside, outside, and under the hood
Cruise Control
Door Locks
Head Liner
Complete Fluid Service
Drive Shaft Seals
Power Steering Hoses
Possible Failed Transmission
That’s about it. If I were to take this bad boy down to a mechanic I’m pretty sure the labor alone for all this could buy a pretty nice used late model LR3 or Range Rover. That leads us to the obvious question, why fix it? Well, you didn’t read this far down this blog post to ask that question, you know why. Because I, like you, love your Range Rover and can’t imagine not having it sitting in the driveway waiting for me to jump in and tear off down the road.
I hope to have all this fixed in time for the inevitable Snowpocalypses of 2010 and 2011. And with my new utility trailer I hope to make a few camping trips with my wife next year.
The good news for my readers is the fourteen new entries to the Tech Tips Section of www.OkieRover.com these projects will create.
All this and I’ve been thinking about reviving the local Land Rover Owners club for the OKC metro area. So look for more info on that in the coming months. I have a photographer and former Land Rover driver (RovErica), anyone know a good web programmer that works cheap?
Thanks for reading and Happy Rovering.











































