Wiper blade reset (Post #606) 3/28/2023

Wiper reset

When I last repaired my windshield wiper motor I did a terrible job getting the wiper blades set in the correct position. I was pretty frustrated with myself when I finished that job and realized I did it wrong.

I lived with it for several years. When I started this recent restoration I decided I would get that sorted out. The job has a couple of benefits:

  • I get the blades set correct on their home
  • I have the cowling off so I can replace the windscreen seal when I get the windscreen replaced.

I made a video of the job and explained several of the more complicated points to getting this job right.

Hope you enjoy it and it’s helpful.

You can support me on Patreon.

Thanks for reading and Happy Rovering.

Door Card Refurbishing (Post #605) 3/21/2023

Door cards

Imitation is the sincerest form of flattery that mediocrity can pay to greatness. – Oscar Wilde.

I’ve put together a video of me assembling the refurbished door cards for the Range Rover Classic. I didn’t record an intro nor did I record an outro. It’s just me assembling the cards. If you watch the Working Axle YouTube channel [YouTube.com] you will see some of the prettiest videos. If you aren’t watching him, you are missing out. His videos are simple, cinematic, and yet informative, and he doesn’t say a lot. So this is my homage to his brilliant work. Unfortunately for you, my videos aren’t as pretty or well shot, suck to be you, never-the-less I appreciate you visiting me and sincerely hope this content assists you.

So there’s no pithy commentary. I had to stop at one point and run to the hardware store to get more nuts and bolts. Just some assembling of door cards.

Brown is back!!! I think these door cards look great now with a new coat of paint. The dark brown is very similar to some of the interiors of modern cars today. I seriously looked at getting dark brown seat covers. But in the end I went with the Knightsbridge seat covers so they ain’t going to be brown.

You can support me on Patreon.

Thanks for visiting and Happy Rovering.

Transfer Case Knob Repair (Post #604) 3/14/2023

Shift Knob

Looking for the thread specification was pretty easy with a Google search. I stumbled on this thread on Rangerovers.net. “Tex” from Italy states its a M10x1.5. “LanceL” had a novel idea to use a M10 Rivnut.

https://www.rangerovers.net/threads/transfer-case-knob-thread-pitch.345708/

I decided to use a M10x1.5 nyloc nut. I also bought a bolt to go with it which provides a clean threaded path to the nyloc nut. I also used some of my supply of Dr. Crafty Clear Epoxy Resin [Amazon.com]. As you will see in the video. I cleaned out the shift knob. I also carved “channels” in the knob to provide “keys” to keep the resin from someday rotating inside the perfectly cylindrical knob.

I then placed the bolt with the nyloc nut on it down inside the knob. Mixed up my resin and poured it in. It took 72 hours to cure. I let it sit for a full week, due to work, and a living history camping trip I had planned at Ft. Towson [Oklahoma Historical Society].

This project turned out great. It was easy, didn’t require any tools that most Land Rover owners don’t already own. I was genuinely surprised this actually work as I had hoped it would. Now I can turn to the rest of the 3000+ things I need to do to the Big Whit Bus to get her back on the trail.

This project was a 1 on the Difficulty Scale.

Support me on Patreon if you feel moved.

Thanks for visiting and Happy Rovering.

Fender Rust (Post #597) 4/5/2022

Big shocker!

I found some rust under the left rear fender wheel well. I know! you are probably as surprised as I am!! (/sarcasm).

There were some signs of rust under the wheel well. I pointed them out in another video. So I decided to investigate. I found a lot of rust.

I’ve watched a bunch of videos where guys fix the rusted body panels and sub-structures. I guess it is my turn. I took a welding class a few months back and this was exactly why I took the class. However, I don’t have the tools I need to do most of these repairs. Not yet, anyway.

I will need:

  • A welder ($400 to How much do you want to spend amount of dollars)
    • Welding hood (already own it)
    • Welding gloves (already own it)
    • Fancy pliers (already own it)
    • Training (already done did it)
  • Metal break ($50 to I’ll probably borrow JagGuy’s)
  • A bunch of wire wheels to remove rust ($6 to $15+ for the fancy name brand ones)

I’m going to take a couple week break. I need to do some remodeling on the house’s master bathroom (Mrs. Okierover will be happy when I get this done.) I’m going to the Midwest Overlanding and Off-Road Expo (aka MOORE EXPO).

If you are thinking, “when will you get the Big White Bus back out on the backroads?” Well, I don’t know. At this pace…probably in the Fall. Trust me when I say…I really want to get her fixed and reliable again. Funding does matter, so hopefully that won’t be too big a constraint.

There will be more on this rust issue as I get back in the shoppe and start to sort out this mess.

Thanks for reading/watching and Happy Rovering.

Current Progress (Post #594) 12/14/2021

In the latest installment, I chat about my current progress on getting the Big White Bus back on the road. I had to take a week off for family coming in for the holiday, and Mrs. Okierover and I both got bronchitis that decided to hang on for 3 weeks (you can hear the Stevie Nicks in my voice). That slowed work on the to-do list. This weekend I’ll probably need the new heater in the shop as it should start getting colder here on the Southern Plains.

In the video, I show the closed cell neoprene installed. I talk about a small missed part on the heater box install. Also talk about getting a new seat controller ECU and getting the seats out. A few words about adjusting the door handle for the driver’s side rear door.

Then instead of shutting up, I drone on more about my desire to have a new bumper, a storage box/bed, and installing D-rings.

I know the video work needs improvement and as I torture you as you watch them make more and more they should improve. When I’m a big interwebs video star you can say, “I remember when that bum first got started. Man those early videos sucked.”

Your feedback is always appreciated.

Thanks for reading/watching, click and subscribe, and Happy Rovering.

Neoprene for the Win (Post #594) 12/9/2021

A new vlog (do people still call this VLOGging?) on the continuing saga of restoring my Range Rover Classic. I talk about replacing the spongy floor pan covering with closed cell, marine grade, neoprene. I also talk about a possible plan for the seats to be recovered.

I think I’ll take the seats to a local upholstery shop and have them recover them. I have to get the seats out of the Big White Bus first and ….my seat switch controller has failed. I droned on about that so I cut that part of the video out and skipped ahead.

Tell me what you think of these video posts (vlogs, youtubes, whatever…). They seem to be easier than typing up a bunch of text and posting pictures of the work. They might suck…I don’t know, so if you don’t tell me they are terrible How am I to ever know?

Link to Amazon.com and the XCEL Extra Large Marine Roll, Closed Cell Neoprene Rubber with Adhesive, Size 60″ x 16″ x 1/2″. Made in the USA!!!! USA! USA!

Thanks for watching and Happy Rovering.