Tag: Range Rover

Posted on

Shipwright’s Disease (Post #598) 8/23/2022

Badges 
Take a moment to consider the tragic condition known as Shipwrights Disease:

Sailor owns boat.

Boat has burned out light in galley.

Sailor decides to replace bulb.

Sailor notices socket is corroded, decides to change socket.

While changing the socket, sailor notices wiring is frayed.

Sailor decides to change wiring.

While replacing the wiring, sailor finds galley ceiling slats are rotted.

While replacing the galley ceiling slats, sailor notices …

… And so on, and pretty soon, the boat is in dry dock undergoing a major restoration because of a burned out light bulb.

Source: Robert Couse-Baker, flickr.

I‘m OFFENDED!

Wait, no I’m not, maybe I’m guilty. My best friend JagGuy diagnosed me. He’s probably right.

So let me defend myself. Why did I pull the Range Rover into my shoppe and park it four years ago? I had two major problems when she was parked:

  • Ignition system became entirely unreliable
  • The heater blower motor let some of the magic smoke out of its wires

Were there other things that needed some attention when I parked her. Yes, yes there were. I’ve listed them in another post. We can add rusted panels to that list.

In my defense, I believe it was time for the Big White Bus to get another restoration. She has 280,000 miles on her clock.

Do I want her to be a show queen? Not by a long shot. I’ve never owned a car I was afraid to drive through a barbed wire fence. But the interior is looking pretty rough. The condition of the interior and exterior directly affected the insurance pay out I received when that idiot was reaching for the jar of spasgetti (that’s how my grand kids say it) and slammed into the left rear. If you missed that post from 2016, you can read about that here [Okierover.com].

So I’d like to fix some things on the dash that failed after 30 years (she shipped out of Solihull in October of 1992) of sun and cold and sun and poor application of paint at the factory and the sun. You know what I’m talking about. Plastic will eventually break down if exposed to the unforgiving southern plains sun.

Air conditioning…does it make sense to fix the AC? Well hell’s bells I have the bloody dash off why not?!? Have you ever sat in bumper to bumper traffic on I-35 with 110F August heat? I can tell you it will make a man of you, well what’s left of you when you get home anyway.

Rust, I took a welding class just so I could fix the panels…

The paint on the outside is losing it’s clear coat and is badly oxidized….

Seat covers…definitely should be replaced…

Those D pillar vents are looking pretty bad…

Okay. I admit it, it is likely Shipwright’s Disease.

In all honesty, I don’t have the money lined up right now to fix everything and make the Big White Bus my daily driver again. Makin he my daily again makes moderately economical sense because I could drop the 2014 F-150 off my insurance, sell it for what I’m being told is north of 20,000(US)$. (The used auto market at the time of this post is incomprehensibly over blown.) That’s more than half what I paid for her 5 years ago. She’s been a good truck. The reason for her was to pull a camper we bought that my wife later decided was not going to be in our future plans for weekends. Cash out, spend some of that on the BWB, am I right?

Probably won’t happen. More likely the BWB will be my weekend overlanding vehicle. That works too. I miss driving her. I digress.

I’ve said this many times. Every job on the Range Rover becomes three projects. Every bolt you touch either needs to be replaced with stainless, or de-rusted, painted, and the panel you pulled it from rust abated.

Is this Shipwright’s Disease, probably. Am I going to change anything to cure myself? Nope.

Thanks for reading and Happy Rovering.

Posted on

Lucas Elimination Part Duex (Post #572) 4/6/2017

If you’ve been following along with my plan to eliminate my Lucas ignition system you know we’ve had some struggles. Remember the goal, to replace the expensive and moderately reliable Lucas parts with easy to source, available in nearly any auto parts store, inexpensive (sometimes with a lifetime warranty) ignition parts.

No one wants to pay 200$(US)+ for an ignition module that takes 5 days to arrive from one of the coasts or 100$(US)+ for an ignition coil when you damn well know that a similar coil and ignition module for a 1977 Chevy Nova costs 75$(US) and both have a lifetime warranty. Before I owned this Land Rover I had never experienced an ignition module or coil failure….NEVER, on a dozen cars across the entire spectrum of vehicles I have driven.

Our current issue, while we have managed to source an ignition module for 25$(US) and a coil for just under 50$(US) the ignition modules are failing at a rate a great deal worse than the Lucas setup. Think, every 2 weeks I’m replacing an ignition module. I carry TWO spares just in case.

This is in all actuality worse than the Lucas setup. A great deal of science has gone into the conditioning of the voltage and current going into the module and coil. A lot of thought by people a great deal smarter than me has gone into figuring out what is causing the failure of the GM modules we are using to replace Lucas. We’ve come down to this, we need a coil that has higher resistance than the coil we originally sourced. So to that end we now have an ignition module AND coil from a 1977 Chevy Nova with the L6 engine. Matter of fact this is the coil used on 965 different models of cars look at the list here. There’s even 32 models of Jeep on that list! Even with all the models using this coil, this is not a coil commonly stocked at your neighborhood O’Reilly’s. That is a bit disappointing but it is to be expected. The ignition module which is the more common of failure points, is a very common GM part and available in most auto parts stores.

So if you are trying to do the same to your beloved Land Rover.

The coil is a BWD – Ignition Coil Part # E41 available for 23.99$(US) Lifetime Warranty

The ignition module is a BWD – Ignition Control Module Part # CBE4P available for 29.99$(US) Lifetime Warranty

I’ll be installing these this weekend and will keep you apprised of any additional failures and what we are doing to eliminate them. During a fit of frustration recently I purchased a new Lucas ignition module and official coil and I am prepared to put them back in and scrub this experiment. I was able to find them on Amazon.com below the cost of some Land Rover parts sites you have seen online and with my Prime membership they came to the house in TWO DAYS! That will work. It won’t work if I’m stuck in the middle of the Comanche National Grasslands 30 miles or more from the nearest parts store, so I guess I’ll be carrying a spare from here on out, perhaps even two spares.

I’m hoping to have a reliable rig for an Oklahoma Overland Group run to the western part of the state at the end of this month. If you think you’d like to go check out the Oklahoma Overland Group on the Facebook.

Thanks for reading and Happy Rovering.

Posted on

Leaks? I think I’ll pass (Post #558) 5/14/2016

20160514_123423

We’ve all heard the jokes.

“If your Land Rover isn’t leaking you’ve run out of that fluid.”

I heard them all, I’ve even made up some of my own. But the jokes are all true. The only Land Rovers that don’t leak are still in the first 3 years of their life. Even then, I’m not entirely sure you won’t have a leak of some kind. The basic premise is, if you’ve cracked open a system, coolant, oil, transmission fluid, air condition, steering fluid, brake fluid, blinker fluid, it doesn’t matter, that system will forever leak from that day forward.

This year I decided, I’m not going to pour my hard earned money “through” my Land Rover any longer. You buy the fluid, you pour it whatever reservoir, and you see it on the ground in your parking spot at home, work, wherever you park. I decided I am stopping that now.

Earlier this year, I started with my power steering system. I got that sealed back up only to have the “O” rings fail and it leak out again. That’s fixed now.

I then decided that my oil leak needed to stop. I replaced my oil sump gasket and got that sorted. This will probably always “weep” but it’s not leaving a puddle and I’m good with that.

The last major leak is the coolant system. This is one you don’t ignore. You get an aluminum block too hot and you’re doing engine work. In this case I had my expansion tank finally give up. It had a slow leak in the seam. I sourced a new one and decided the coolant hoses were starting to resemble over-inflated balloon animals and needed to be replaced as well.

The filler tube nut was also past it’s life expectancy. I bought a brass one and another plastic one. The brass one was actually for my radiator but the plug there was soldered and would not be replaced. I used the brass one to clean the filler tube threads. That worked better than I expected.

I got the system filled and started looking for leaks. There were none in the things I touched. But I still had a leak from under the transmission. There are no coolant line back there I thought, “What the hell?”

I let the engine cool a bit while I solved all the world’s problems with Mr. Fisher. I then began what I hoped was not a leaking heater hose. The heater hoses that go across the top of the motor to the heater core are back there. That has to be where the leak is coming from.

20160514_123451

You can see the offending hose there on the firewall. The hose clamp is the one. Turned out it was not tight at all. I was able to turn the hose with my hand.

Getting it tight required pulling it off and replacing the hose clamp and combining various combinations of socket sets to get the socket on the clamp screw. Eventually I got it tight.

I had to fill the system again so that process was followed again. Finally I got done and started the engine up to get her back to pressure and hot to look for leaks. I also moved the Big White Bus down the driveway to spot new leaks.

20160514_123430

And to my surprise just as I expected there were no leaks. It was decided a maiden voyage to Hollywood Corners for lunch. On the way the coolant light decided it was going to notify me of a low coolant situation. I knew this wasn’t possible. Did I have an air bubble?

When I got the BWB back tot he hacienda I opened and saw the level in the tank was below the fill mark. I topped her off. I also decided to swap my cap for one I salvaged off one from the breaker’s yard.

So for the time being I’m leak free. And for the next 24 hours I’m going to be the only human on earth with a 23 year old Land Rover that doesn’t have any leaks. That feels good.

Thanks for reading and Happy Rovering.

Why 24 hours? Because I’ll drive her again tomorrow and I’m sure I’ll be planning how I’ll stop the new leak.

 

 

 

 

Posted on

CV Joint and Front Axle Seal (Post #504) 6/23/2014

Here is what will pass for a how-to video on the CV Joint and axle seal replacement. I had trouble videoing it with greasy hands. I also had trouble because the phone ran out of disk space.

That let to some choppy video and you didn’t get to see the assembly. What I do hope you get from this is that it is not as complicated or difficult as it may appear. Take it one step at a time and it will become really easy to understand.

On the Okierover Difficulty Scale this is a solid 3. You’ll need more than your average tool kit. You’ll need some help with the brake bleeding. It is a technical job but relatively straight forward.

I hope you can get something from the video. It was not what I wanted to present. But I also didn’t want to waste all the video and effort.

Thanks for watching and thanks for reading and Happy Rovering.

Posted on

Looking Good from the 6th Floor (Post #501) 6/14/2014

 

 

 

southview

I snapped a couple of pictures from my new office. In the picture from left to right on the horizon…

The Capitol, Downtown OKC, right next to the “Eye of Sauron” is the steeple of the church we laid my friend Whit Edwards to rest in, Crown Heights neighborhood in the forested area with Bishop Guinness High School on the far right with I-44 in the foreground.

Its a great view. My Range Rover Classic is just below us. It’s the only Land Rover in the entire parking lot. The building houses nearly 500 people, only one Land Rover.

sixfloor

I usually park in the open space directly behind me but someone snuck in it while I was out at lunch that day. Shade from the giant cottonwood tree is much appreciated as it starts to turn warmer.

parkinglot
Zoom in…

Thanks for reading and Happy Rovering.

Proudly powered by WordPress