Tag: rust

Posted on

Upper Tailgate Repair on a Range Rover Classic, Part 3 (Post #673) 9/29/2024

In this post I finish up the upper tailgate repair. I finished up all the rust removal and put the frame back on.

This went “good”, I guess. I broke one bolt on the passenger side latch mechanism. I didn’t finish the seal. There were two holes that the rivets would not work in. I tried to tap them for a 10/32 bolt. I need to but the bolts and see if my tapping worked.

I tested the latch but it didn’t work super great. So I have some more work to do to get that adjusted again. It was working perfectly before I took it apart. So it may need more adjusting.

I took a few minutes to investigate where my backup camera will need to be mounted. I’ll have to experiment more once the head unit is installed. I only get one shot at drilling and installing. I gotta make it count.

I didn’t get to finish the job this weekend. One, the tapped screws did not get bought. Two, we had torrential rains happen today. At one point the rain was falling at 2 inches an hour. It slowed down some and in the end we got 5 inches of rain in 6 hours. It’s still sprinkling. This will break the drought we were under.

Next week I’ll wrap up the tailgate probably off camera. Next project is the rear floor. I still haven’t sorted out how I’ll get the rust off. So that’s the research I need to do this week.

Like and subscribe.

Thanks for reading, and watching, and Happy Rovering.

Posted on

Upper Tailgate Repair on a Range Rover Classic, Part 2 (Post #672) 9/22/2024

thumbnail

In this video I continue to refurbish the upper tailgate frame. It’s crusty. I ordered some 30 inch wire bottle brushes to attempt to get the rust out of the frame.

They worked great. I ordered them from Justman Brushes. Made in America too!! I eventually nipped the ring off of one and inserted it into my drill. This was pretty clever of me if I do say so myself.

Once I got as much of the rust out as I thought I could get, I moved to get the paint in there. It did occur to me that I could have dipped the frame in sulfuric acid. But I would have had to start all over and in the end, I still had to rely on the paint pouring to coat the interior.

I will still have to lightly sand the frame to even up the paint. The rust preventative paint is some very thick stuff.

At the end of the video I go on a rant that I liken never finishing the Range Rover Classic to Shipwright’s Disease. I posted on this previously back in 2022. You can see that by clicking the link Shipwright’s Disease [Okierover].

Read Tailgate Repair Part 1 here….

Carry on to Part 3…

Thanks for listening to me whine, like and subscribe, and Happy Rovering.

Posted on

Upper Tailgate Repair on a Range Rover Classic, Part 1 (Post #671) 9/15/2024

Yeah, yeah, I know, “I thought you were working on the floor bed?!?”

I was, but I looked at the upper tailgate and I know it’s gonna be hard to believe, but I found RUST! Shocking! Anyway, I thought I’d investigate and my OCD took over and then I was halfway through with taking it apart.

So what’s wrong? The inner tube of the lower frame is rusting BADLY from the inside out. Lots of surface rust on the outside but also rust has eaten through the steel inside out.

Do I have any hope at all that I can save it? A little, at least I’m gonna slow it down. This is one of those parts on a Range Rover Classic that rusts. Check the message boards…everyone has rust on their tailgate.

IF you buy a new upper tailgate protect it from rust immediately, do not pass Go, do not collect $200. If you don’t you will lose it to rust.

So the plan now is to paint it, I already have two coats of primer on it. The second is a daffy plan to pour rust preventative paint down the tube. Yeah, you read that correctly. I found a place to buy steel tube brushes. Justman Brush Company. I ordered the minimum of 6 brushes.

I’m going to run the brush through the tube until it stops the rust bits stop coming out. I’ve already poured “kitty litter”, you know the stuff that you use to soak up oil spills, down it until I was sure it wasn’t doing anything.

Once that job is done, I’ll reassemble. I’ve already bought all stainless steel hardware. I’ll protect the threads with copper anti-seize. This will hopefully limit the corrosion on the hardware.

That’s about it. If the brushes arrive by next weekend I’ll be finishing the tailgate and reassembling. If no, I’ll be working on the floor again. I forgot to disconnect the battery last weekend so this weekend I was reminded I have a slow drain somewhere in the wiring OR the alternator diodes have failed again. I’ll test next week by just disconnecting the alternator.

Upper Tailgate Repair, Part Two

Upper Tailgate Repair, Part Three

Like and subscribe to the channel and the blog.

Thanks for reading and Happy Rovering.

Posted on

Rear Floor Pan Repair on a Range Rover Classic (Post #670) 9/7/2024

In this post I play a chemist and use muriatic acid to de-galvanize the zinc off my Z bar. Some time ago I sourced some Z bar to rebuild the rusted ledge of the floor panel. Welding galvanized steel can make you sick. It requires a well ventilated space and likely a respirator. There are lots of videos on the YouTubes that show guys welding galvanized steel. I’ve seen enough warnings to know I don’t want anything to do with it.

So using some of the acid for the swimming pool I decided to chemically remove the zinc. This too is very dangerous. So this is fair warning, don’t try this at home kids.

I got the zinc off in short order and got the Z bar double primed and double coated with black paint. I have no fantasy that this will never rust. I just don’t want it to rust through in the next 10 years.

I also got the sunroof drain installed. This was rewarding. Getting little jobs done is great. I bought a “step drill” and am now wondering why I didn’t buy one A LONG TIME AGO. This was pretty awesome. It was expensive at $58.00(US) for one that would cut mild steel.

My next step is to dry fit the panel to confirm the Z bar and panel will fit in the place it once was. I also reached out to my biological brother’s sister (we didn’t grow up together) to see what getting the panel stripped with her metal stripping service. I really can’t go forward without that step completed.

That’s about it for this week. Like and subscribe on YouTube. Subscribe to the blog so you get notifications. I had a hit with…

Footwell Repair Part 6: Floor Panel Repair, Seam Sealer (Post #665) 8/5/2024

As of this post it has more than 1,000 views!!! I have no idea why. Most of my videos don’t get to 100 views.

Thanks for ready and Happy Rovering.

Posted on

Footwell Repair Part 7: Floor Panel Repair, Final Assembly (Post #666) 8/12/2024

Post #666!!!! Not today Satan, I finally wrap this fender up. Maybe a proper Devil Dog would have made a more creative 666 post. You’ll just have to settle for one of my old tags.

Mrs. Okierover made me get a new tag…she’s religious that way.

Anyway, I got this beast reassembled. Mostly reassembled…okay I got the fender on and the wiring loom back in place. It’s significant okay!? Dang!

My grand son Grady came over (mostly because he was bored at home) to help. And help he did! A lot of what I filmed before he got there was lost. I truly hate this GoPro, if its not overheating halfway through a shot, it’s dropping files, or losing the sound track off a segment. Trash. I’ve read a bunch of complaints about this GoPro 11. Several telling everyone they’ve fixed a bunch of the overheating in the GoPro12!! Now it overheats 1/3 less! Nope. Not gonna fall for it. GoPro, if you want to redeem yourself you can send me a 12 for free and I’ll give it a review. You probably won’t like the review, but I’ll give one an honest one.

Back to the assembly, I got the wiring loom put back in place. It went surprisingly well. The fender went on pretty easy. I did make one mistake in the building of the side bulkhead. I should have made it longer. The result was I didn’t have one of the two fender mounting places. I also lost some hardware. So I went to the hardware store to get replacements. Met a fellow Marine building a Skoolie camper for his family to travel in. Sounded like a fun project.

When I got back and Grady and I had wrapped up the video I was finishing the assembly and guess what I found?? Yeah, the missing screws and bolts I stopped looking for 3 hours earlier. Isn’t that just typical.

On an annoying note… the damn Big Whit Bus wouldn’t start. So I get to deal with that issue again. YAY! /sarcasm font.

Like and subscribe! Or whatever.

Thanks for reading and Happy Rovering.

Posted on

Footwell Repair Part 6: Floor Panel Repair, Seam Sealer (Post #665) 8/5/2024

I started the weekend fixing my 2014 F150. I’ve been hearing noises from the front and could feel some vibration in the floorboard. I talked to a few of my co-workers and they diagnosed wheel hubs. So I ordered a set of Timkin hubs and new brake discs and pads. I spent 5 hours putting them on. I setup the awning for shade so I wasn’t in the sun the whole day.

Victory was mine and I spent the rest of the day mowing the yard and working in my pumpkin patch. I have 5 Kakai pumpkins so far and will have a bunch of pepitas to munch on.

Sunday I set to getting the seam on the new panel sealed. Nothing too exciting about this. I did learn that 3M seam sealer is way more expensive than the German made UPOL brand. 3M $72.00(US), UPOL $22.00(US). That’s a big discrepancy.

I’ve got a problem with the welds on the transmission tunnel side. I can’t reach them to get them cleaned (the panel under there is oily and dirty), the rubber coating (no longer attached to the steel), and I can’t get to the panel because the exhaust is in the way. I’ll need to drop the exhaust. I’m not excited about that. I need to get her up on a lift to see if it would be easier. More on this on another post.

I’ve got everything sealed. Next up, I need to coat all the panels in the wheel well in truck bed liner. I’m hoping this will DELAY the inevitable.

The next post will be me fumbling to remember how to reassemble this part of the truck.

A little shout out to Mrs. Okierover as it is our 35th wedding anniversary this weekend. Happy Anniversary sweetheart.

That’s about it, like and subscribe, and as always Happy Rovering.

https://youtu.be/yBh2xRWomw0
Proudly powered by WordPress