More of the same (Post #120) 12/17/2008


I haven’t had much to blog about lately. The Discovery still has a door panel off waiting for me to get a window regulator or the plastic wheels to fix the existing mangled regulator.

The Range Rover is still throwing codes for 69 position switch and 44 for a bad O2 sensor. And the exhaust still sounds like crap. The down turn in the economy has me on hold for now. Maybe after the new year comes around. My mother usually gives me money for Christmas, maybe I’ll buy parts with it this year.

Good news, the door lock on the rear door of the Discovery just magically started working again. It had a weird problem. When I locked the Disco, the latch would not go down. When I double locked, it would go down. But if I doubled it would not unlock when I unlocked the vehicle. Weird. But with the ultra cold weather recently, 11 degrees F on Monday, things have changed.

Heavy Sigh (Post #91) 5/29/2008

So a year and a half ago I bought a poly-bush kit for the Classic. I thought, “I’ll just go up to JagGuy’s shop and throw these on and be done with it.” I found out this is an eight hour job and mostly not much fun. So I’m looking for a shop that will do it for me. I went to one today (I’m not going to mention the name) and they had a policy that prohibited customers bringing their own parts in for replacement.I got red onesI got the red ones.

I’ve to respect that in some small way, due to watching too many people “bring their own knowledge” and parts to the computer industry I work in. If you told them up front, if you work on it before I do, it will cost you double, most people would laugh. But it often does. First you have to un-do their mistakes and then work on it yourself.

So now I’m still looking. I’m thinking though that I can’t afford the 8 hours of labor a shop is going to charge me and I’m probably going to do the job myself. Gone are the days when I could just whip out the credit card and worry about paying later. Heavy sigh…I hate being broke.

The Classic sounds like CRAP. The exhaust is screwed. I need new catalytic converters for sure. I know this due to hearing the ceramics bouncing around in them for a year. But even though I don’t drive it…it’s bothering me how it sounds. I’ve got two routes: new catalytic converters or a new Y pipe. Either way I’m out several hundred dollars. If I had a welder and the knowledge I’d do this myself. Heavy sigh…I don’t know how to weld.

Girl Welder of girlwelder.comI have a feeling that I will be driving it again before the end of next year on a daily basis. So I need to keep it up and take good care of it, even though it goes mostly unappreciated and depreciated by a daughter who uses the ample leg room in the back much like she uses the floor in her room to “store” things. Considering the last time I cleaned out the back for her, I’ve been in cleaner dumpsters. I fuss about it…and she continues to trash it out. Heavy sigh…teenagers.

Teenagers are the bane of many a Land RoverThe leather in the Classic is also visually telling us it’s had better days. I found Lexol at a local feed store. Surprised I made an impulse purchase only to find I already had a bottle at home I haven’t been using. Good news, it was slightly cheaper than the online places and I helped out a local guy with a sale. Heavy sigh…too much crap in the garage.

Our current house doesn't look like this, not at allMy garage at our previous house.

So I need to get out there and save what is left of the leather in the Classic. The driver’s seat is a goner. Nothing to do there. But the rest of the leather can be saved if I religiously put that stuff on and possibly some “leather feed” my Jaguar buddy is always telling me about. So I’ve got to find a seat to replace the trashed one. Just getting the leather and putting it on is, I’m told, a huge undertaking. So I can buy a seat from Rover Cannibal, I heard Ryan mumble one day, “they have plenty of seats”. Heavy sigh…another project I don’t have time to do.

Rover CannibalStill the coolest logo in the business.


Today we added a fourth to our carpool. The drive to work just got a lot cheaper.

Thanks for reading, and happy rovering.

July 8th, 2005 (Post #61)

July 8th, 2005

There is a huge update in the works. I have started on it now twice, once yesterday, and again today, having deleted several days work. Very frustrating.

Engine
JagGuy and I have the engine in. We started on it April and finished it after three long weekends. JagGuy has all the skill necessary for a successful transplant. And it showed. He had the heads off and the engine built before I could get in the shop each weekend. He has the luxury of Fridays being fun days and he used his “fun” day for my engine. What a great friend.

With the engine swap we found several other problems. I will start listing them and I will probably forget some as there were many.

Radiator
It was indeed a head gasket problem but with that there was also a problem with the radiator. It was clogged again. We noticed that when we revved the engine the hoses would flex. Meaning there was a lot of pressure in the system. Frustrated I replaced the radiator with a new one from Atlantic British. Cooling problems vanished.

Heater Core
One of the final things to be blown by the old engine was the heater core. I have heard horror stories about getting the dash off to replace this part. I will wait for a weekend in September or October when it gets cooler to replace this. I bought the replacement core when it came up on British Pacific’s Steve’s Deal of the Day.

The wife
While I’m sure some of you were expecting me to say I was replacing my wife, I have not. She has been harrassing me lately about the costs of the BWB. Keeping a 12 year old car on the road in good working order is hard. It is harder when it was designed in a British Pub by 12 drunk engineers. But for my piece of mind and to reassure her that I was not spending the milk money for frivolous toys I pulled a report out of Quicken of all the auto repair expenses. I was surprised by the amount, surprised in a good way. She was surprised in a bad way. 2800 dollars (US) was the tally for the period since I made the final payment back in November 2004.

Not bad for all the things I’ve bought for the engine and including oil changes for both cars. She still believes with all her heart that a $450 a month car payment would be cheaper than putting parts on the paid off Rover. I have now classified the Rover as a restoration project. So the costs are easier to stomach as I am restoring a car, just like on TV!!!!

Steering seal
The morning after I got the BWB home with all the overheating problems we planned to return her to the shop in Edmond, it was a cool April morning so I figured the heating problems would be less if I went in the morning. After I pulled into the gas station to fill up I got out and noticed the long red stream of fluid leading from the street to underneath the Rover. Transmission fluid, but from where?

After a long look it was the steering box. Since ATF will burn and considering the blow back to the exhaust I drove her home defeated and disappointed. We put a seal on the next weekend.

Steering Shaft
Once again on sale at British Pacific. If you look at the steering shaft you will notice a rubber grommet there. Mine is hard as a rock and cracked. Obviously failed. Now the question begs why can’t we just replace the rubber bits. Well I bought a new shaft and will investigate if the old can be repaired when I get it off of there. Hammerin’ Dan observes that the heat from the headers is probably to blame in the rubber failing. Possibly some asbestos wrap might be in order.

Brake Switch
The ABS lights came on and with some investigation and a clever way to short the diagnostic plug I learned my brake light switch had failed. I got a replacement on sale from British Pacific’s Deal of the day. The installation was not any fun due to the location and the contortionist position you have to get in. Also my eyes don’t work that well up close and so most of the install was done while guessing on a blurry image.

Radio
The steam that escaped from the blown heater core filled the cab with nasty antifreeze steam. The radio immediately from that day forward would act like it lost power often loosing the code. Occassionaly it would not work at all. I thought sure the steam killed it. I was wrong. The ignition switch is failing. You may say, “what the hell?” Well it would be a good question.

The accessory function of the switch that powers many things like the windows and other stuff is apparently shorting out or not making connection. So among the other things the ignition switch is failing and needs some help.

Carpets
Had to clean the carpets again due to the antifreeze leak inside the cab. Due to my previous planning I did not have to remove the center console. Sweet!

Exhaust
Having spent a good three hours under the BWB during the engine project I noticed that none of the hangers were replaced the last time I had the exhaust worked on at University Muffler. That is disappointing cause I like those guys their work is just not very good. I had it in there again recently to have a torn exhaust pipe fixed. Due to the hangers being unhooked the only place the exhaust was attached had stressed the pipe to the point that the silencer at the rear was about to break off. I had them cut it off and weld on a pipe. It changed the sound some but not too bad. Well the weld for that section broke. So I took it to Discount Muffler just up the road from the office and had them put a good weld on it. It cost me 25 bucks but it’s now welded. I will come back to them to have the new cats welded in as soon as I buy them.

Archive

I broke up the archive in to sections based on the year. I’ve been doing this
Rover Log for 3 years now. Wow.

So be patient with me as I get the new pages up. Thanks for reading and happy
rovering. Tell your friends about the site.

August 26th, 2003 (Post #33)

August 26, 2003
As I mentioned some time ago I picked up an exhaust from Rover Cannibal and had intended on installing it. To do this you may remember I would need a lift which I learned later a friend of mine has and was willing to be present to operate it and assist me with the exhaust. Since then I had surgery on my arm to remove a six inch plate and 12 screws that over the years had begun to give me some pain in the elbow when I used wrenches and picked up grocery sacks. But it is gone and life is good. There seems to be a rattle in one of the mufflers but I can live with it I think.

Cupholder Update
The heat of August was not conducive to me turning wood in the garage so the cup hold project is on hold. I have the cupholder in the truck and it works great. I have determined some ways to adjust the holder with small changes and am now working on the cellular phone holder. I find my cellular phone in the holder more often than a drink and believe a phone holder would be a good addition. I hope to turn some cups this Saturday before the football game (Go Sooners!).

Fuel Filter Change
I also swapped my fuel filter this last week. I was hoping to fix a starting issue that leaves me holding the key a little longer than I should to start the truck. You are supposed to remove a fuse that supposedly “depressurizes” the fuel line but had no luck learning which one you pull. I couldn’t remember from last time. So with the advice I got from Paul Davis on our Tech Board I just changed it. I would say about a cup of fuel came out when I disconnected it. As I suggested to Michael73 on the board with that much fuel coming out and getting on me make sure you change the filter when your neighbor, that chain smokes and thinks it’s cool that you “Do your own work”, is away fishing or eating at the “All you can eat catfish” place down the street. You don’t want him to cause you to burst into flames while trapped under your truck. Imagine what it will cost to have it repainted! Maybe that’s just what happens in my neighborhood, anyway change your filter, it can’t hurt unless you bang your knuckles using the wrench.

July 8th, 2003 (Post #32)

July 8, 2003
As I stated in my last entry I had a nasty tick, tick, tick sound coming from under the hood.
Well I finally snuck out of my housework on Sunday to look at it. In between a load of laundry
and a messy bathroom I ventured out the laundry room door into the garage and out to the truck. I was not spotted in my slippery move to investigate the ticky sound. I crawled under the truck dragging my pony tail in some lovely filth and oil to find that I was 2 missing nuts on my driver’s side exhaust. So I got two more and tightened it back up and the noise is no more. I checked the passenger side of the engine and there was one missing over there. So I replaced the missing nut over there too.

If I had not been so lazy I could have gotten that fixed much sooner. I was so happy with myself
that when a friend came down to borrow a wrench just as I was finishing I went four doors down and helped him replace his waterpump on his GM Suburban. It was pretty easy after we got the fan off. This is his second waterpump in two years. My neighbor next door replaced his second water pump in two years also this last month. What is it with GM vehicles and bad water pumps?

Technical note. The Ditchfinder recommended that I get copper nuts for the exhaust instead of steel. Apparently Volkswagon uses copper to secure their exhaust and the copper nuts do not rust or corode (as much?). I asked him where I would find such things as I have never seen them in my lifetime. He is convinced they are readily available and very low cost. I think I will keep an eye out for them.

April 17th, 2003 (Post #28)

April 17, 2003
Need a Lift?
“Your gonna need a lift.” Kurt said, when I picked up my new exhaust at Rover Cannibal. As you probably remember my current exhaust has a bad case of rust and corrosion. Maybe just rust as there is not enough of it left to notice any corrosion. I was inspired by Mr. Fat Jack in the 1984 movie Splash in which he states to Tom Hanks while waving a hammer, “I can fix it, I’m mechanical.”

Well I got it home and after a thorough investigation at a minimum I am going to have to jack up the body a bit. Maybe more like lift the body up. Okay so I call my buddy JagGuy and he says why don’t you take it over to Roger’s. I’m thinking great, I can litter Roger’s driveway with my burden and maybe if I buy enough beer he’ll do the work too.
So I say, “Why should I take it to Roger’s?”
“He has a lift.”
“Really, you don’t say?”
He is my hero truly. He doesn’t know it yet, but he is. I haven’t asked him yet but I am assured by JagGuy he will say no problem.

Head gasket update
I still haven’t acquired the funds to purchase the gasket kit and the price of having my heads at the shop yet. JagGuy assures me that I can get another 100,000 out of the motor if I do the heads when I get them off truck. I’m all about maximizing my vehicle value so I will have the
heads re-done when they are off the truck. It makes a weekend project into a multi-weekend project.

But what am I if I am not made out of money? I have time, for I am young. Now what am I gonna drive that week? Maybe JagGuy has a spare Jaguar for me, or maybe even his Rover. Yet another thing to ask of him while he is assisting me with my heads. I have already determined this job will be a 4.5 difficulty on the Difficulty Scale.

Cupholder Goodness Update
I have unboxed my new wood lathe. I have gotten out all the tools and actually turned a piece of wood. It is harder than it looks. I have gotten some tips from Ford Stepsides and the next attempt will be better. I have a friend that felled some red cedars at his ranch and I can have as much of it as I want. I think I will try turning some bowls with that this weekend maybe.