Some time ago I noticed the footpad on my inner fender well would droop when I rested my foot on it. In the beginning I would just put my foot under it and lift it back up. But one day when doing that the footpad broke away from the fender well.
The bolts holding the footpad in place had rust welded to the fender well. So when I was lifting it back into place I was actually bending the fender well pieces, much like you wiggle a wire rapidly to break it. As I’ve said before I really have become accustom to resting my foot on the pad and I wanted it fixed.
So I took some time and investigated and repaired it. I used a Dremel tool with a 60 grit grinding wheel and got as much rust off the inner and outer fender well. While I was behind the quarter panel I also ground off some surface rust.
Once I had it all ground down, I applied some acid etching primer to the metal surfaces. I know it won’t last forever, but maybe it will slow down the rust.
Thanks for reading and watching the video. It’s low quality but hopefully entertaining.
Thanks for reading and Happy Rovering.