This week is part two of Grady and I trying to get the damn Z bar attached to the bed. We had a helluva time getting our welds to stick. In the end it came down to me removing a lot of the primer and paint I spent so much time getting into place.
The welds were not taking because the ground was poor. It required me to grind off a lot of paint and to get new vice clamps to hold the steel together.
Taking that paint off was no challenge for the power tools. It was painful to me because my ultimate goal in all this was to put this floor bed back together BETTER than it was before. The better is that I don’t have to worry about it rusting out.
Once I get it back together, I am going to spend significant time getting it recoated with paint and rust preventative coverings. This may be challenging with winter now upon us. It was 70F today but it is in the thirties in the mornings. I’m hoping for a warm spell around the new year so I can get the paint applied.
That’s about it for this episode. Like and Subscribe.
Thanks for reading and Happy Rovering.